Overview
The Power Stop K2167-36 is a front Z36 Truck and Tow brake kit for the 2003-2005 Dodge Ram 1500, with slotted and cross-drilled rotors and metallic pads.
It does not include calipers and is a direct-fit design. The 2003-2005 range covers a narrow slice of the Dodge Ram 1500 generation, so check your year carefully. The Z36 range is aimed at heavy braking, wet or hilly conditions, and towing.
Key features
- Front kit for the 2003-2005 Dodge Ram 1500
- Slotted and cross-drilled coated rotors
- Z36 high-friction metallic pads
- Direct fit
- No calipers
Things to check
Swapping only the front brakes changes how the truck balances braking between its axles, so the rear pads and rotors deserve a look at the same service. A worn rear set can make a newly refreshed front feel uneven under hard stops.
Rotors with slots and cross drilled holes shed water and gas quickly, which helps in wet conditions, but the openings also collect dust. Clean the rotor face before fitting new pads, and check that caliper bracket bolts are tight after the first few stops. Re-check the bolts after the first few trail runs or towing trips.
- Measure existing rotor thickness before choosing the kit
- Inspect caliper pistons and slide pins
- Replace brake hoses that show cracks
- Bed in new pads gradually before heavy use
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K2167-36 |
| UPC | 792088566317 |
| Product type | Truck and tow brake kit, without calipers |
| Series | Z36 Truck and Tow |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Z36 high-friction metallic |
| Brake position | Front |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Power Stop lists K2167-36 for the 2003-2005 Dodge Ram 1500.
The list names one model and a three-year window, so there is little ambiguity: a Dodge Ram 1500 built in 2003, 2004 or 2005, and the front axle only. Neighboring years fall under other kits, and the heavier Ram models are not covered.
Only this three-year Ram 1500 range is named. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The existing front calipers are reused, since none come in the kit. It is a direct-fit design, and brake lines are not included.
What’s included
Expect coated, slotted and cross-drilled rotors together with a set of Z36 metallic pads, and nothing beyond those parts.
Not included: Calipers, brake lines and any other hardware beyond the rotors and pads would need to come from elsewhere.









