Overview
The Power Stop K5338-36 is a front-and-rear Z36 Truck and Tow brake kit covering both axles of the 2001–2010 Chevrolet Silverado 3500 and GMC Sierra 3500.
Because it covers both axles, one kit refreshes the whole brake system’s rotors and pads with slotted, cross-drilled rotors and Z36 high-friction metallic pads. Calipers and brake lines are not supplied. Rotors and pads that are designed as a pair take the guesswork out of a brake refresh. Power Stop describes its kits as a quick, direct route to better braking, and says they produce more pad bite than other leading brands without added noise or dust.
Key features
- Matched rotor and pad set from Power Stop’s Truck and Tow line
- Slots and cross-drilled holes in each rotor
- High-friction metallic Z36 pads
- Built for tow vehicles and loaded trucks
- Direct-fit design
- Kit does not include brake lines or calipers
Front and rear service planning
When both axles are refreshed in one job, the brake system responds more evenly under load. Plan the work so that all four rotors and pads are replaced together and the calipers are checked at the same time. Mixing worn parts on one axle with new parts on the other can shift braking force and make the truck pull under hard stops.
Heavy trucks rely on steady rotor temperature when towing, so the surface of each rotor should be inspected for hot spots, scoring or heat cracks after the first few runs. Keep the brake fluid fresh, since moisture in old fluid lowers its boiling point. Replace parts that show uneven wear rather than stretching their life on a heavy load.
- Replace front and rear sets together
- Check calipers for sticking pistons
- Inspect rotors for heat cracks
- Keep brake fluid fresh
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K5338-36 |
| UPC | 792088948939 |
| Brake position | Front and rear |
| Rotor type | Slotted and cross-drilled |
| Brake pads | Z36 Truck and Tow high-friction metallic |
| Rotor coating | Coated |
| Calipers | Not included |
| Brake lines | Not included |
| Fit type | Direct fit |
Vehicle fitment
The kit fits the 2001–2006 Chevrolet Silverado 3500, 2007 Silverado 3500 Classic, 2007–2010 Silverado 3500 HD, 2001–2006 GMC Sierra 3500, 2007 Sierra 3500 Classic and 2007–2010 Sierra 3500 HD.
Lighter Silverado and Sierra 1500 and 2500 models, and years after 2010, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a direct fit that requires no drilling or fabrication. The truck’s own calipers are reused with the new rotors and pads. Replace pads and rotors as a pair on each axle.
What’s included
Matched rotors and Z36 high-friction metallic pads.
Not included: calipers and brake lines.









