Overview
The PIAA RF Series LED Driving Light Bar Kit, part number 26-07118, is an 18 in. LED light bar kit with a Hybrid beam and an SAE Compliant rating. It is a universal fit kit, so no vehicle is tied to it and the 18 in. bar must suit your bumper, roof or bar location.
Shoppers comparing driving lights can use the 18 in. length and SAE Compliant rating as the main points of reference.
Key features
- 18 in. LED light bar
- Hybrid beam
- SAE Compliant rating
- Kit format with LED light bar
Before you wire it
A driving light bar adds forward light for low-speed trail work and night driving, and its output is only useful when the bar is aimed correctly. Mount it where the beam clears the hood line and is not blocked by a winch, bar or recovery gear. Aim it level and recheck the angle after the first few trail runs, since bumps and vibration can shift brackets.
Wiring matters as much as mounting. A light bar draws significant current, so run it through a fused relay with a switch that is easy to reach. Use wire gauge suited to the load and route cable away from moving suspension parts and sharp edges. Inspect connectors and grommets each season, and look for corrosion or chafed insulation, which are early signs of a fault.
- Keep the bar clear of the hood line and recovery points
- Use a switch within easy reach of the driver
- Re-check bracket bolts after rough trail sections
Specifications
| Brand | Piaa Lighting |
|---|---|
| Part number | 26-07118 |
| UPC | 722935800059 |
| Length | 18 in. |
| Beam | Hybrid |
| Rating | SAE Compliant |
| Type | LED driving light bar kit |
Vehicle fitment
Universal fit. No year, make or model is named, so confirm that the 18 in. bar suits your bumper, roof or bar location.
Installation notes
Feed the bar through a fuse and relay, and check local rules before using it on public roads.
What’s included
The kit is built around an LED light bar. Check the package contents against your installation before starting.









