Overview
The Auburn Gear Master Install Kit, part number 541086, is a ring and pinion installation kit for the Chrysler 9.25 in. 12 Bolt.
The Chrysler 9.25 in. 12 Bolt is the application this kit is built for.
Ring and pinion setup basics
Ring and pinion gears only work well together when the mesh, backlash and bearing preload are set correctly. A kit can supply the gears and parts, but the setup depends on careful measurement and steady adjustment. Rushed installs often show up as whine, heat or early wear, which is why careful setup matters.
Start by cleaning the housing and checking the bearings and seals. Measure each setting as you go and write the readings down, since small changes in pinion depth or shim thickness affect the whole gear set. Turn the gears by hand to feel for tight spots before the axle is closed.
Professional setup is common for ring and pinion work, especially when the gear pattern needs adjusting. A good setup gives a quiet ring gear and a predictable pattern, and that is worth the time before the vehicle goes back on the road.
- Clean the housing before any measurement
- Record each shim and pinion reading
- Check bearings and seals before assembly
- Turn the gears by hand before closing
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 541086 |
| UPC | 700008363221 |
| Listed application | Chrysler 9.25 in. 12 Bolt |
Vehicle fitment
Confirm which vehicles use the 9.25 in. 12 Bolt axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.








