Overview
The G2 Axle and Gear 35-2054 is a master ring and pinion installation kit for the Dana 50 front axle. It collects the bearings, shims, pinion nut, crush sleeve, seals and compounds that a Dana 50 gear install needs in one package.
The kit is a Dana 50 front axle kit made by Dana. It is sold as universal fit, so confirm the axle type before installing.
Key features
- Master kit with bearings for a Dana 50 front axle
- Shim kit and replacement pinion nut
- Crush sleeve, pinion seal and pinion bearings
- Carrier bearings, ring gear bolts and silicone sealer
- Loctite and gear marking compound included
Dana 50 front gear care
Dana 50 front axles carry heavy loads and see steering and suspension movement, so the pinion and carrier bearings and the ring gear bolts should be checked whenever the carrier is out. Worn bearings can make a whine or a rough feel under load, which is a sign the install should be reviewed.
Good setup habits matter as much as the parts. Keep the carrier clean, set preload with care, and recheck the ring gear bolts after the first few drives. Replacing the pinion seal during the same job avoids another teardown later.
- Check the pinion seal and bearings for wear
- Recheck ring gear bolts after the first drives
- Listen for whine or rough feel under load
- Keep the carrier and bearing surfaces clean
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2054 |
| UPC | 631410096033 |
| Axle manufacturer | Dana |
| Axle type | Dana 50 |
| Axle location | Front |
| Kit type | Master kit with bearings |
Vehicle fitment
The kit is universal fit, and the Dana 50 front axle type decides whether it suits your vehicle.
This kit is written for front Dana 50 axles only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A front axle gear install is a set-up job: pinion depth, carrier preload and backlash all have to be dialed in, and gear marking compound shows whether the tooth contact is right. Gear set-up and break-in are best left to a professional.
What’s included
The kit includes a shim kit, replacement pinion nut, crush sleeve, pinion seal, pinion bearings, carrier bearings, ring gear bolts, silicone sealer, Loctite and gear marking compound.
Not included: No ring and pinion gear set is named in the contents.











