Overview
The Hella ValueFit Design 6 LED Light Bar, part number 357209001, is an 11 in. black LED light bar with a combo beam pattern and multivolt power. It is a universal-fit auxiliary light rather than a vehicle-specific part, so it suits off-road rigs and other vehicles with room for a compact light bar.
It belongs to the ValueFit Design range. Its 11 in. length suits a narrow mounting spot such as a bumper or grille.
Key features
- Combo beam pattern
- Multivolt rating
- 11 in. black housing
- LED light source
Compact bars for tight spots
A compact bar fits where a full-size light bar would block airflow or clash with a winch, grille or bumper contour. Measure the spot first, then check the offset between the bracket and the bar so the lens sits clear of panels. Mounting low on a bumper or grille keeps the light clear of the hood’s sweep.
Combo beams suit small bars well, since the spread covers close ground while still reaching a short distance ahead. Rear-facing or reverse-use mounting is a separate question and needs its own wiring and placement check. Use the same fuse and relay approach as for any auxiliary light.
- Measure clearance around the bracket before drilling
- Use a relay so the switch does not carry the full load
- Inspect the housing seal after each season
Specifications
| Brand | Hella |
|---|---|
| Part number | 357209001 |
| UPC | 760687161073 |
| Length | 11 in. |
| Beam pattern | Combo beam |
| Voltage | Multivolt |
| Finish | Black |
Vehicle fitment
This light bar is universal fit and is not tied to any year, make or model. Check that the 11 in. length and the mounting area suit your vehicle before fitting it.
Installation notes
Wire the bar through a fused relay, and check local rules on auxiliary lights before using it on public roads.




