Overview
The G2 GM 12 Bolt 9.76 Inch Master Install Kit is a rear ring and pinion installation kit for GM 12 bolt axles with a 9.76-inch axle type. It is a master kit that supplies the parts needed to install a ring and pinion.
The kit includes ring gear bolts, shims, a crush sleeve or spacer, a pinion seal, a pinion nut, and gasket or RTV silicone. Timken tapered roller bearings are included where applicable.
Key features
- Ring gear bolts for the ring gear mounting
- Shims for ring and pinion setup
- Crush sleeve or spacer
- Pinion seal and pinion nut
- Gasket or RTV silicone option
- Timken tapered roller bearings where applicable
Gear setup basics
A ring and pinion install sets three things: pinion depth, carrier preload and backlash. Each affects how the teeth load and how long the gears last. Shims and the crush sleeve are used to reach those targets, so they should be sorted and measured rather than guessed.
Gear marking compound is applied to the ring gear teeth, the carrier is rotated under light load, and the contact pattern shows whether the set is positioned correctly. Adjust in small steps and recheck after each change. Many installers do this on a bench or with a shop that has a setup tool.
- Clean all parts before assembly
- Replace the pinion seal every time it is removed
- Keep shims in order as they are measured
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| UPC | 631410136265 |
| Axle location | Rear |
| Axle type | GM 12 Bolt 9.76 inches |
| Popular axle manufacturer | GM |
| Kit type | Master kit with bearings |
Vehicle fitment
The kit is made for GM 12 bolt 9.76-inch rear axles. Before ordering, confirm the year, model and trim, and identify your axle housing and ring gear size.
Confirm your vehicle’s year, model and trim before ordering. Identify the axle housing and ring gear size so the kit matches your rear end.
Installation notes
Ring and pinion installation sets pinion depth, carrier preload and backlash, and the tooth contact pattern is checked with gear marking compound. Professional gear setup is the usual approach for this work.
What’s included
Ring gear bolts, shims, crush sleeve or spacer, pinion seal, pinion nut, gasket or RTV silicone, and Timken tapered roller bearings where applicable.
Not included: ring gear and pinion gear set.










