Overview
The G2 Axle and Gear 91-2011 is a Daytona pinion support for Ford 9 inch rear housings. It is C and C machined from billet aluminum and offered with several bearing options, so the bearing choice depends on your performance needs.
G2 places it in the rear position for the Ford 9 inch housing type. No vehicle models are named.
Key features
- Machined from billet aluminum
- C and C construction
- Multiple bearing options to suit performance needs
- Rear position, Ford 9 inch housing type
Bearing choice and support
A pinion support holds the pinion bearing and keeps the pinion in line with the ring gear, so its fit and bearing choice affect gear mesh over time. Billet aluminum machining gives a clean, precise surface, and the bearing you choose should suit how hard the axle will be worked. Check the housing bore and the bearing outside diameter before buying.
Aluminum supports are lighter than steel, but they need care during install. Clean the bore thoroughly, avoid overtightening the bolts, and recheck pinion depth and preload after the first drives. Wear on the support bore or loose bolts can change gear mesh, so inspect it during each rebuild.
- Clean the support bore before installing
- Check bearing fit against the housing
- Avoid overtightening support bolts
- Inspect the bore during each rebuild
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 91-2011 |
| Product line | Daytona |
| Material | Aluminum, billet |
| Construction | C and C machined |
| Axle location | Rear |
| Housing type | Ford 9 inch |
| Bearing options | Multiple (sizes not stated) |
Vehicle fitment
Fitment is by housing type, not by vehicle: Ford 9 inch. No model or years are given, so confirm the housing before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The pinion support is the item supplied. Select the bearing option that matches your build before ordering.








