Select your vehicle

G2 GM 12 Bolt Car Minor Ring and Pinion Installation Kit – 25-2019

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • For the GM 12 bolt 8.875 inch rear axle, car version
  • Minor kit: bearings are not included
  • Shims, crush sleeve, pinion nut and pinion seal
  • Part number 25-2019

Description

Overview

The G2 Axle and Gear 25-2019 is a minor ring and pinion installation kit for the GM 12 Bolt 8.875 Inches rear axle.

The car version of G2’s GM 12 bolt minor kit is the 25-2019. In the box you get a shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound, intended for jobs where the bearings are staying.

The 25-2019 is one of two G2 minor kits for the GM 12 bolt 8.875 inch axle, and it is the one marked for cars. Both versions give the installer the essential gear-setting parts without bearings. A proper shim kit allows depth correction, the nut, crush sleeve and seal are renewed, and Loctite and marking compound support a clean, checked assembly of the gear set.

Key features

  • Minor kit for the GM 12 Bolt 8.875 Inches axle (rear)
  • Meant for jobs that keep the existing bearings
  • Shim kit for setting pinion depth and carrier position
  • Pinion nut, crush sleeve and pinion seal
  • Ring gear bolts and silicone sealer
  • Loctite and gear marking compound

Car-side checks before assembly

Gear whine from a rear axle often shows up as a high-pitched hum that rises and falls with speed, and it can come from worn teeth or an incorrect pattern. Because the kit includes the shims and sealing parts, this job is a good time to check the carrier bearings, pinion bearings and ring gear teeth for wear before reassembly.

Use a dial indicator to check ring gear runout and backlash, and keep the ring gear and carrier clean. Store each race with its matching bearing so they go back where they came from. A correct break-in with fresh gear oil helps the new set settle smoothly over the first stretch of driving.

  • Check bearings for pitting or heat discoloration
  • Keep races paired with their bearings

Specifications

Brand G2 Axle and Gear
Part number 25-2019
UPC 631410094916
Kit type Minor kit
Axle location Rear
Axle type GM 12 Bolt 8.875 Inches
Axle manufacturer GM
Manufacturer part number G/225-2019

Vehicle fitment

It is the car version for the rear GM 12 bolt 8.875 inch axle. Verify the axle type and year before buying, since the same axle size also has a truck kit.

Confirm your vehicle’s axle type and year before ordering.

Installation notes

Take the time to confirm your axle is the car type, since the same 8.875 inch size also has a truck kit. Reuse of the bearings means checking them carefully before assembly.

Before starting the 25-2019 job on the GM 12 Bolt 8.875 Inches axle, gather a dial indicator, a torque wrench and clean gear oil. Note the old pattern on the teeth, because the shims in the 25-2019 are the means of correcting the new one. The old nut and seal are replaced. Keep races paired with bearings.

What’s included

  • Proper shim kit
  • Pinion nut
  • Crush sleeve
  • Pinion seal
  • Ring gear bolts
  • Silicone sealer
  • Loctite thread locker
  • Gear marking compound

Not included: bearings and gears; the 25-2019 is a minor kit for the GM 12 Bolt 8.875 Inches axle.

SKU: G/225-2019 Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 12.90 × 12.80 × 3.10 in
brands

Questions & Answers

What axle does the 25-2019 kit fit?

It is for the rear GM 12 bolt 8.875 inch axle, car version. Trucks with that axle size use the 25-2018 kit, so confirm the version before ordering.

What is included in the 25-2019 kit?

Contents are a shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound.

Does the 25-2019 include bearings or gears?

No. G2 made its minor kits for newer vehicles that do not need new bearings. Check 25-2019 against your axle type.

Can I reuse the old pinion nut and crush sleeve?

No. The pinion nut, crush sleeve and pinion seal are replaced during this job, since a crush sleeve sets preload once and is not reliable when reused. Install the new parts as a set.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon