Select your vehicle

G2 NP207 Transfer Case Rebuild Kit – 37-207

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Axle and Gear NP207 transfer case rebuild kit, part 37-207
  • Bearings, seals, bushings and gaskets; chain not included
  • Fits 1984–1986 Jeep Cherokee (XJ) in four trims

Description

Overview

The G2 Axle and Gear NP207 Transfer Case Rebuild Kit, part number 37-207, is a set of bearings, seals, bushings and gaskets for rebuilding an NP207 transfer case in the 1984–1986 Jeep Cherokee (XJ), in Base, Chief, Laredo and Pioneer trims.

The kit brings together small components that are hard to find one at a time, so a worn transfer case can be rebuilt from a single set. The chain is not included, and the kit is a direct fit for the trims below.

Key features

  • Gathers the hard-to-find small parts for an NP207 rebuild
  • Bearings, seals, bushings and gaskets in one set
  • Chain is not included
  • Direct fit for 1984–1986 Cherokee XJ trims
  • Aimed at a worn transfer case rebuild

Before a transfer case rebuild

A transfer case rebuild is a bigger job than a simple seal change, because the gears, shafts and bearings all have to be checked for wear together. Clean every part thoroughly and look for chipped teeth, pitting or heat marks on the gear surfaces. Bearings that feel rough or loose should be replaced, even if the old ones look usable from the outside.

Check the front output seal and yoke while the case is open, since they are easy to overlook. Use fresh gaskets and a clean sealing surface, and measure any play before reassembly. Fluid choice and fill level should follow the vehicle’s requirements once the rebuild is complete.

  • Clean all parts and mating surfaces before reassembly
  • Replace worn bearings and seals together
  • Check the chain for stretch or rust
  • Use new gaskets rather than reusing old ones

Specifications

Brand G2 Axle and Gear
Part number 37-207
UPC 631410107418
Transfer case NP207
Contents Bearings, seals, bushings, gaskets
Chain Not included
Fitment type Direct fit

Vehicle fitment

It fits the 1984–1986 Jeep Cherokee (XJ) in Base, Chief, Laredo and Pioneer trims. Cherokee model years after 1986 and other Jeep models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.

Cherokee model years after 1986 are not on this list, and no other Jeep models are shown. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A transfer case rebuild involves disassembly, bearing and seal installation and careful clearance checks, so it suits a mechanic with transfer case experience. Because the chain is not included, check the existing chain during teardown and obtain a replacement if it is worn.

What’s included

The kit includes bearings, seals, bushings and gaskets.

Not included: the transfer case chain.

SKU: G/237-207 Category:

Specification

Shipping weight 2.60 lbs
Package dimensions 12.90 × 12.80 × 3.10 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1984–1986Base, Chief, Laredo, Pioneer

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the NP207 rebuild kit fit a 1987 Jeep Cherokee?

No. It fits only the 1984–1986 Jeep Cherokee (XJ) in Base, Chief, Laredo and Pioneer trims. Model years after 1986 are not covered, so confirm your transfer case before fitting the kit.

Is the timing chain included in the kit?

No. The chain is not included with the kit. Inspect the existing chain during teardown and obtain a replacement separately if it shows wear.

What parts come in the G2 NP207 kit?

The kit contains bearings, seals, bushings and gaskets, the small parts needed for a transfer case rebuild. Compare the kit contents against your teardown before starting the job to confirm nothing else is needed.

What is part number 37-207?

Part number 37-207 is the G2 Axle and Gear NP207 Transfer Case Rebuild Kit, UPC 631410107418. It is a transfer case overhaul kit for NP207 units in the 1984–1986 Jeep Cherokee XJ.

Should the chain be replaced during a rebuild?

Often yes, since chain wear is hard to judge by sight and a worn chain can slip under load. Measure play and look for stretch, rust or damaged links during teardown, and replace it if any sign of wear appears.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon