Overview
The Crown Automotive D20MASKIT is a transfer case overhaul kit for a long run of Jeep trucks and utility vehicles. It fits the 1972–1979 Jeep CJ5, the 1972–1975 CJ6, the 1976–1979 CJ7, the 1966–1973 Commando and Jeepster Commando, and J-series trucks from J-200 through J-4800 plus the J10 and J20.
Confirm the transfer case in your vehicle matches the kit before selecting it, and check your model and year against the fitment entries above.
Key features
- Transfer case overhaul kit for the CJ and J-series models above
- Crown Automotive part number D20MASKIT
- Direct fit for the CJ and J-series models above.
- Fitment runs from 1963 to 1979
Choosing a rebuild kit
Older CJ and J-series trucks often have transfer cases that have seen decades of use, so a rebuild is usually considered when shifting becomes stiff, the case weeps lubricant or the drive feels noisy in one range. Before ordering, look at the transfer case tag and the number of shift positions your truck uses, then compare them with the models above. Parts inside the same case tend to wear at similar rates, so budget for seals and bearings together.
Shops working on these trucks often replace the output seals and check the shift linkage at the same time, since loose linkage can make a fresh rebuild seem to fail. Clean the case thoroughly, inspect the shafts and gears for pitting, and keep any shims or spacers in order so end play can be set correctly. A service manual for your specific truck is a practical reference throughout the job.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | D20MASKIT |
| UPC | 848399078831 |
| Category | Transfer Case Overhaul Kit |
Vehicle fitment
The manufacturer fitment list covers the Jeep CJ5 (1972–1979), CJ6 (1972–1975) and CJ7 (1976–1979), the Commando and Jeepster Commando (1966–1973), and the J-series trucks from J-200 through J-4800 plus the J10 and J20 (1963–1979, mostly Base trim). Each model has its own year range in the list.
Wrangler, Cherokee and Grand Cherokee models are not in this list, and the CJ and J-series entries end in 1979. Pick the entry that matches your model and year, since trims vary from one line to the next.
Installation notes
This kit is for a transfer case rebuild, so fitting it means opening the case and replacing internal parts. Plan for a service manual, the correct tools and a clean bench, and verify the transfer case in your vehicle before starting.
What’s included
Inventory the parts in the box against your rebuild plan before you begin.





