Overview
The G2 Axle and Gear NP249J Transfer Case Rebuild Kit, part number 37-249J, is a rebuild kit for NP249J transfer cases in 1993–1998 Jeep Grand Cherokee (ZJ) models, covering several trims.
The kit supplies bearings, seals, bushings and gaskets for a transfer case that has worn. The chain is not included, and the kit is designed to fit the Grand Cherokee trims covered in the fitment section.
Key features
- Covers the small parts for an NP249J rebuild
- Bearings, seals, bushings and gaskets
- Chain not included
- Direct fit for 1993–1998 Grand Cherokee ZJ trims
- Rebuild kit for a worn transfer case
Teardown and reassembly
Rebuilding a transfer case is slow work, and most of the time goes into cleaning, measuring and fitting bearings correctly. Work on a clean bench, lay out parts in order, and keep bearing races paired with their original positions. A shop press or proper bearing drivers prevent the bearing damage that a hammer can cause. Shift forks and sleeves often show wear at their contact faces, which is a common reason a rebuild is needed in the first place. Reassembly goes more smoothly when each bearing is oiled or greased as your service information directs before it is pressed in. Because the kit does not include the chain, measure the chain and sprockets during teardown and decide early whether they need replacing. Shifting through all ranges before the unit goes back into the vehicle can save a second teardown.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 37-249J |
| UPC | 631410107814 |
| Transfer case | NP249J |
| Contents | Bearings, seals, bushings, gaskets |
| Chain | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Fitment covers the 1993–1998 Jeep Grand Cherokee (ZJ) in 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims.
Grand Cherokee model years outside 1993–1998 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rebuilding a transfer case involves disassembly and careful bearing and seal fitting, so a shop with transfer case experience is a sensible choice. Inspect the chain during teardown, since it is not supplied with the kit.
What’s included
The kit includes bearings, seals, bushings and gaskets.
Not included: the transfer case chain.







