Overview
The G2 Axle and Gear 25-2057 is a Toyota FJ minor ring and pinion installation kit for the front axle. It supplies the parts needed to set up new gears in the front differential when the bearings are being reused.
The kit is designed for an installer working on a newer vehicle and holds items that an auto parts store seldom carries: a shim kit, replacement pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound.
Key features
- Toyota FJ front axle installation kit
- Minor kit, intended for installs that keep the bearings
- Shim kit included
- Replacement pinion nut and crush sleeve
- Pinion seal and ring gear bolts
- Silicone sealer, Loctite and gear marking compound
Things to check
Before starting a front gear change on a Toyota FJ axle, look at the existing gears and bearings. Chipped or pitted teeth, rough bearings and a damaged pinion seal are all signs the job needs more than a setup kit. Confirm the axle is the front FJ unit and not a rear axle, since this kit is made for the front position only.
The shim pack sets pinion depth, and the marking compound shows how the teeth meet. Small changes in shim thickness shift the mesh, so each adjustment should be checked by pattern. Keep the housing clean, replace seals that were disturbed, and use fresh gear oil once the job is complete.
- Inspect gears and bearings before ordering
- Confirm the front axle position
- Replace disturbed seals and use fresh gear oil
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2057 |
| UPC | 631410108040 |
| Product type | Minor ring and pinion installation kit |
| Kit class | Minor kit |
| Axle manufacturer | Toyota |
| Axle type | Toyota FJ |
| Axle location | Front |
| Kit contents | Shim kit, replacement pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite, gear marking compound |
Vehicle fitment
The 25-2057 comes with no vehicle list or model years. G2 names the axle type Toyota FJ and marks the fit Universal Fit, so this is a front axle kit chosen for that axle rather than for a stated year range.
The 25-2057 does not cover rear axles or other Toyota axle designs. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shim kit is used to set pinion depth and the marking compound shows how the gear teeth meet, which is why a Toyota FJ front gear swap is a job for an experienced installer. The kit has no gears. The pinion seal protects against gear oil leaking past the new pinion. Loctite keeps the ring gear bolts from backing out, and silicone sealer is used where the housing closes up again. Gears need a careful break-in afterward.
What’s included
- Shim kit
- Replacement pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer
- Loctite
- Gear marking compound
Not included: the gear set and bearings.







