Overview
The G2 Axle and Gear 25-2041 is a minor ring and pinion installation kit for the Toyota 8 Inch 4 cylinder differential. It works at the front or rear, and it covers the install parts for a gear swap when the bearings stay in place.
The 25-2041 gathers a shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound. These are the parts that are often hard to find at a general auto parts store.
Key features
- Toyota 8 Inch axle, 4 cylinder version.
- Usable in the front or rear position
- Shim kit included for gear setup
- Pinion nut, crush sleeve and pinion seal replaced
- Ring gear bolts, silicone sealer and Loctite
- Gear marking compound to verify the pattern
Engine and axle matching
The Toyota 8 inch axle is used in several configurations, so matching the parts to the axle before the job starts saves time. Identify the axle by its housing and cover markings, and confirm the engine version when the axle came with it. Mixing parts from different versions leads to a mesh that cannot be adjusted correctly.
On a front or rear installation, the gear set is the core of the job and the shims set its position. Measure pinion depth, then backlash, and confirm each with marking compound. Replace the crush sleeve, and fit a fresh pinion seal so gear oil stays where it belongs during the first drives.
- Confirm axle markings before buying
- Plan for a fresh pinion seal and crush sleeve
- Use clean gear oil at the correct fill level
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2041 |
| UPC | 631410095104 |
| Product type | Minor ring and pinion installation kit |
| Kit class | Minor kit |
| Axle manufacturer | Toyota |
| Axle type | Toyota 8 Inch (4 cylinder) |
| Axle location | Front or rear |
| Kit contents | Shim kit, replacement pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite, gear marking compound |
Vehicle fitment
It is matched to the Toyota 8 Inch 4 cylinder axle design, not to a single vehicle. Confirm your vehicle’s year, model and trim, and your axle size, before ordering.
The 25-2041 is not the kit for the Toyota 8 Inch V6 axle, which has number 25-2043, nor for other Toyota axle sizes. Confirm your vehicle’s year, model and trim, and your axle size, before ordering.
Installation notes
Setting pinion depth and backlash with the supplied shims is the heart of the job, and the crush sleeve sets pinion preload once. The 25-2041 does not include gears, so gear selection and professional setup happen separately.
What’s included
- Shim kit
- Replacement pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer
- Loctite
- Gear marking compound
Not included: the gear set and any bearings.








