Overview
The G2 Axle and Gear 35-2015A is a master ring and pinion install kit for GM 7.5/7.625-inch IFS axles. It packages the pinion nut, pinion seal, crush sleeve, bearings, shims and assembly compounds that a ring and pinion replacement calls for. It is made for 2006-2016 Colorado, Canyon and H3 applications.
Pinion depth and carrier preload are set during installation, so the included shims, crush sleeve and gear marking compound are used together rather than separately.
Key features
- Pinion nut and pinion seal included
- Timken outer and inner pinion bearings with races
- Crush sleeve for pinion preload
- Pinion and carrier shims plus carrier bearings and races
- Ring gear bolts, thread locking compound, gear marking compound and silicone sealer
Working on IFS front gears
Independent front suspension axles keep the differential inside the front frame and usually have less room around the carrier than a solid axle. That tight space makes pinion depth and carrier access harder, so plan extra time for setup. Working with the vehicle supported at a steady height helps keep the carrier aligned during install.
Gear marking compound is applied to the ring gear teeth before a test rotation, and the contact pattern shows where setup needs changes. Keep the shims organized by side and by function, since the pinion and carrier shims are chosen separately. Replace the crush sleeve whenever the pinion nut is loosened.
- Plan extra time for pinion setup in tight space
- Mark shim packs by side and function
- Discard the crush sleeve after each tightening
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2015A |
| UPC | 631410130294 |
| Axle type | GM 7.5/7.625-inch IFS |
| Pinion bearings | Timken outer and inner |
Vehicle fitment
Fitment is confirmed for 2006-2016 Colorado, Canyon and H3 applications with GM 7.5/7.625-inch IFS axles only.
Other GM axles and model years fall outside this fit, so check your year and model before ordering.
Installation notes
Setting pinion depth, carrier preload and gear backlash takes measuring tools and gear-setting experience, so professional setup is the practical route. Keep the gear marking compound for the tooth contact check.
What’s included
- Pinion nut
- Pinion seal
- Timken outer and inner pinion bearings and races
- Crush sleeve
- Pinion shims and carrier shims
- Carrier bearings and races
- Ring gear bolts
- Thread locking compound, gear marking compound and silicone sealer
Not included: the ring gear and pinion set that the kit is used with.








