Overview
The G2 Axle and Gear 25-2031B is a minor ring and pinion install kit for Dana 30 axles. It contains the pinion nut, pinion seal, crush sleeve, pinion and carrier shims, ring gear bolts, and the thread locking, gear marking and silicone sealing compounds used when a ring and pinion set is installed.
Dana 30 rebuild considerations
A Dana 30 minor kit covers the pinion side and the carrier shims, so it suits a rebuild where the gear set is already on hand. The axle is common in older light trucks and Jeep applications, but the name alone does not confirm which vehicle it fits. Measure the housing and cover bolt pattern before buying.
Crush sleeves, shims and seals all affect preload and mesh. Replace each one during a rebuild rather than reusing it, and record shim thickness as you go. Clean the carrier and bearing bores so the new parts seat fully. Off-road use puts shock loads on the pinion, so watch for leaks and noise after the first few drives.
- Measure the housing and cover bolt pattern
- Replace the crush sleeve and seals on each rebuild
- Record shim thickness as you go
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2031B |
| UPC | 631410126600 |
| Axle | Dana 30 |
| Kit type | Minor ring and pinion install kit |
Vehicle fitment
It is made for Dana 30 axles. Check year, model and trim against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
- Pinion nut
- Pinion seal
- Crush sleeve
- Pinion shims
- Carrier shims
- Ring gear bolts
- Thread locking compound
- Gear marking compound
- Silicone sealer
Not included: Check the ring and pinion gears separately before starting, since they are not part of this kit.








