Overview
The G2 Axle and Gear 25-2023 is a minor ring and pinion installation kit for the GM 14 Bolt 10.5 Inches rear axle.
Older heavy-duty GM axles built from 1973 to 1987 are the focus of the 25-2023. It supplies a shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound for the 14 bolt 10.5 inch rear.
The 14 bolt 10.5 inch axle changed over time, and G2 splits its minor kits at 1988. The 25-2023 is for 1973 to 1987 builds. It contains a shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound, so the gear set can be re-shimmed and sealed without new bearings.
Key features
- Minor kit for the GM 14 Bolt 10.5 Inches axle (rear)
- Meant for jobs that keep the existing bearings
- Shim kit for setting pinion depth and carrier position
- Pinion nut, crush sleeve and pinion seal
- Ring gear bolts and silicone sealer
- Loctite and gear marking compound
Before you reshim
Reshimming a ring and pinion means setting pinion depth and carrier preload together. A small shim change moves the tooth pattern, so make one change at a time, record each one, and check the contact again before the cover goes back on. Patience at this stage avoids a second teardown.
Reused bearings deserve a close look. Pitted rollers, rough cups, or bearings that have run at a different pinion depth should be replaced rather than reused. The old pinion nut and crush sleeve are single-use parts, which is why new ones come in the kit.
- Inspect bearing cups and rollers for pitting before reuse
- Clean the carrier and housing faces before applying sealer
- Refill gear oil to the fill plug after the first drive
- Recheck ring gear bolt torque after the first miles
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2023 |
| UPC | 631410094954 |
| Kit type | Minor kit |
| Axle location | Rear |
| Axle type | GM 14 Bolt 10.5 Inches |
| Axle manufacturer | GM |
| Manufacturer part number | G/225-2023 |
Vehicle fitment
It fits the rear GM 14 bolt 10.5 inch axle built from 1973 to 1987. Later 1988 and up axles use the 25-2023A.
Confirm your vehicle’s axle type and year before ordering.
Installation notes
Check the build period of the housing against the 1973 to 1987 range before opening anything. Bearings are reused here, so keep races paired with the bearings they came with.
Before starting the 25-2023 job on the GM 14 Bolt 10.5 Inches axle, gather a dial indicator, a torque wrench and clean gear oil. Note the old pattern on the teeth, because the shims in the 25-2023 are the means of correcting the new one. The old nut and seal are replaced. Keep races paired with bearings.
What’s included
- Proper shim kit
- Pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer
- Loctite thread locker
- Gear marking compound
Not included: bearings and gears; the 25-2023 is a minor kit for the GM 14 Bolt 10.5 Inches axle.









