Overview
The G2 Toyota 8.4 Inch Tacoma Rear Master Ring and Pinion Installation Kit, part number 35-2056, is a master set for installing a rear ring and pinion on a Toyota Tacoma axle with an 8.4 inch ring gear. G2 Axle and Gear classes it as a master kit with bearings for rear axles.
Gear installs often stall on small service parts. This kit gathers the shims, pinion nut, crush sleeve, seals and sealing compounds that many parts counters do not stock, so the job can move forward without a second trip. Local stores often lack these parts.
Key features
- Master kit with bearings, per G2’s kit classification
- Shim kit included for the gear set-up
- Replacement pinion nut and crush sleeve
- Pinion seal, pinion bearings and carrier bearings
- Ring gear bolts, silicone sealer, Loctite and gear marking compound
Before you start the gear job
Replacing a rear ring and pinion is a precise job. The pinion must sit at the correct depth, the carrier bearings need the right preload, and the backlash between ring and pinion has to fall within a workable range. Gear marking compound lets a technician see the tooth contact pattern and adjust shims until the pattern is right. Rushing this step often leads to noise and early wear, so many owners pay a gear shop to handle the set-up while they handle the teardown and reassembly.
Other parts usually come off at the same time. Axle seals, bearings and the pinion crush sleeve are single-use items, so replacing them when the gears are out is the sensible choice. Before reassembly, clean the housing thoroughly and inspect the carrier for cracks or worn bearing bores. Keep the shim stack in order, since it sets the gear position. After installation, drive gently for the first stretch so the new teeth can bed in evenly.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2056 |
| UPC | 631410096057 |
| Kit type | Master kit with bearings |
| Axle location | Rear |
| Axle type | Toyota Tacoma |
| Axle manufacturer | Toyota |
| Ring gear size | 8.4 inch |
Vehicle fitment
The kit is marked universal fit and the axle type is the Toyota Tacoma. Fit by model year is unconfirmed, so confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear setup, including pinion depth, carrier preload and backlash, usually goes to a gear shop with measuring and marking tools. Plan on a break-in period for new gears after the set-up is complete.
What’s included
The set covers a shim kit, a replacement pinion nut, a crush sleeve, a pinion seal, pinion bearings, carrier bearings, ring gear bolts, silicone sealer, Loctite and gear marking compound.
Not included: Ring gears and pinion gears are not part of this kit and need separate sourcing.













