Overview
The G2 Axle and Gear 25-2027B is a minor ring and pinion installation kit for the Chrysler 8 inch IFS front axle, titled for the Ram 1500.
The 25-2027B is for the independent Chrysler 8 inch front axle used in the Ram 1500. The box holds a shim kit, nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and marking compound.
The 25-2027B is for the Chrysler 8 inch IFS front axle used in the Ram 1500. Contents are a proper shim kit, pinion nut, crush sleeve and pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound. Matching the axle matters more than matching the truck name.
Key features
- Minor kit for the Chrysler 8 Inches axle (front)
- Meant for jobs that keep the existing bearings
- Shim kit for setting pinion depth and carrier position
- Pinion nut, crush sleeve and pinion seal
- Ring gear bolts and silicone sealer
- Loctite and gear marking compound
Front axle setup and shimming
Independent front axles keep their gears in a small housing, so access is tight and each step takes longer than it would on a solid axle. Plan the work on a clean bench or lift, and organize the shims, nut and seal before starting. Matching the differential size is the first check, because the gears and carrier depend on it.
The pinion depth is set with shims, then the carrier position is checked with marking compound. Reassemble with fresh seals and torque the bolts in the proper pattern. Recheck the pattern after the first drive, because small changes in the first miles can reveal a setup that needs one more adjustment.
- Organize shims and fasteners before starting
- Set pinion depth before carrier position
- Recheck the pattern after the first drive
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2027B |
| UPC | 631410095005 |
| Kit type | Minor kit |
| Axle location | Front |
| Axle type | Chrysler 8 Inches |
| Axle manufacturer | Chrysler |
| Manufacturer part number | G/225-2027B |
Vehicle fitment
It fits the front Chrysler 8 inch IFS axle used in the Ram 1500. Confirm your front differential size before ordering.
Confirm your vehicle’s axle type and year before ordering.
Installation notes
Because the model is named without years, verify the differential size on your own truck. Setup then proceeds with shims, crush sleeve and a pattern check.
Before starting the 25-2027B job on the Chrysler 8 Inches axle, gather a dial indicator, a torque wrench and clean gear oil. Note the old pattern on the teeth, because the shims in the 25-2027B are the means of correcting the new one. The old nut and seal are replaced. Keep races paired with bearings.
What’s included
- Proper shim kit
- Pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer
- Loctite thread locker
- Gear marking compound
Not included: bearings and gears; the 25-2027B is a minor kit for the Chrysler 8 Inches axle.








