Overview
The G2 Axle and Gear 25-2081 is a ring and pinion install kit that bundles the seals, shims, bolts and setup compounds used when a ring and pinion set is fitted. Confirm fit for your axle and vehicle’s year, model and trim before ordering.
Buyers looking for a 25-2081 install kit should note it is a set of hardware and consumables, not a set of gears.
Before you start the build
A ring and pinion install kit covers the small parts around the gears: shims that set carrier and pinion position, a crush sleeve that holds pinion preload, a pinion seal, and the bolts and compounds that hold the carrier together. These parts are usually replaced whenever the gears come out, because an old crush sleeve and seal have already been compressed or worn and will not reliably hold a new setup.
Before you begin, lay out the gear set, confirm the ring gear size and axle type match what you plan to build, and gather a dial indicator, torque wrench and marking compound. Setup involves checking tooth contact and backlash, and small changes in shim thickness shift both. Measuring before final assembly saves a second teardown.
- Confirm the ring gear size before opening the housing
- Replace the crush sleeve and pinion seal rather than reusing them
- Measure backlash and tooth contact before final torque
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2081 |
| Kit type | Ring and pinion install kit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim, and match the ring gear size and axle type to your gear set, before ordering.
Installation notes
Gear marking compound in the kit is used to check tooth contact, so ring and pinion setup is best handled by a shop with setup experience.
What’s included
Silicone sealer, gear marking compound, thread locking compound, ring gear bolts, carrier shims, pinion shims, crush sleeve, pinion seal and pinion nut.
Not included: the ring gear and pinion gears themselves.








