Overview
The G2 Axle and Gear 35-2042L is a big bearing master ring and pinion installation kit for the Toyota 7.5 inch front axle. The attributes give the axle location as front only, which separates it from the small bearing 35-2042 kit.
Front axle installs call for the same core parts as other master kits: a shim kit, pinion and carrier bearings, a crush sleeve and a pinion nut. Match the bearing size of your carrier to the big bearing designation before ordering.
Key features
- Big bearing version for Toyota 7.5 inch front axles
- Master kit with bearings
- Shim kit and pinion nut
- Crush sleeve and pinion seal
- Ring gear bolts, sealer and locking compounds, plus gear marking compound
Big bearing versus small bearing
A big bearing carrier and a small bearing carrier use different bearings and races, so the two kits cannot be swapped without checking the carrier first. Measure the carrier bearing bores and compare them with the bearing races before the kit is opened. Bearing size is the deciding factor, not the axle name alone.
On a front axle, pinion depth and carrier preload are still the core settings, and the carrier bearings must seat squarely in their bores. Clean the bores thoroughly and check for burrs before pressing in new races. Installing the races slightly off square is a common cause of early bearing noise.
- Measure carrier bearing bores first
- Clean bores and check for burrs
- Press races in square
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2042L |
| UPC | 631410095913 |
| Kit type | Master kit with bearings |
| Bearing size | Big bearing |
| Axle location | Front |
| Axle type | Toyota 7.5 inch |
| Axle manufacturer | Toyota |
Vehicle fitment
The kit is made for the Toyota 7.5 inch front axle type, and no vehicle years or models are named. Confirm your front axle and the year, model and trim of your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is the big bearing version, verify the carrier bearing size against the kit before installing. Gear setup and break-in are best left to a shop with the right tools.
What’s included
Packed items: a shim kit, a pinion nut, a crush sleeve, a pinion seal, pinion and carrier bearings, ring gear bolts, silicone sealer, Loctite and gear marking compound.
Not included: The ring and pinion gear set is not part of the stated contents.









