Overview
The G2 Axle and Gear 25-2031D is a minor ring and pinion install kit for front Dana 30 axles. It covers the pinion-side and carrier-side hardware needed to install a minor ring and pinion gear set.
Match the front Dana 30 axle to your vehicle before starting, since this kit is a minor ring and pinion install set for that axle.
Choosing the right gear set
Because the gears are sourced separately, the choice of ring and pinion sets drives much of the install. The gear ratio, the ring gear bolt pattern and the carrier style should all match the case and the vehicle’s intended use. A gear set that looks right but mismatches the carrier will not seat properly.
Off-road use puts more load on the gears than daily driving, so a set chosen for trail work often justifies new carrier bearings and a fresh pinion setup. Reusing old shims is not a safe shortcut, since the existing shim stack reflects the old gears.
- Confirm the gear ratio before buying
- Check that the carrier style matches the case
- Replace carrier bearings with the new gear set
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2031D |
| UPC | 631410126624 |
| Axle | Front Dana 30 |
| Kit type | Minor ring and pinion install kit |
Vehicle fitment
The kit is for front Dana 30 axles. Confirm fit for your year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear setup with these shims is precision work, so a shop familiar with pinion depth and backlash is the right choice for this kit.
What’s included
The contents are a pinion nut, pinion seal, crush sleeve, pinion shims, carrier shims, ring gear bolts, thread locking compound, gear marking compound and silicone sealer.
Not included: Ring and pinion gears are not part of this kit.





