Overview
The G2 Axle and Gear Dana 30 master ring and pinion install kit, part number G/235-2050L, supplies the bearings, bolts, shims and pinion seal used when installing ring and pinion gears in a Dana 30 axle. An Eaton E-Locker is offered alongside this kit.
G2 Axle and Gear offers its master install kits in several options for nearly four dozen axle models, so the version you choose has to match your axle housing. Universal Fit is shown for this kit, but an installation kit is tied to the axle it was made for.
Key features
- Timken bearings included
- Ring gear bolts and shims included
- Pinion seal included
- Master kit covering the installation parts for ring and pinion gears
Setup and break-in
Ring and pinion install kits carry the parts that set how the gears sit in the housing: bearings that support the pinion and carrier, shims that control spacing, and a seal that keeps lubricant in the nose of the axle. Replacing them together with the gears is common because old bearings and seals wear at a different rate than the new gears they support, and reusing them can undo a careful setup.
A locker adds its own installation steps, so plan for carrier work and check clearances before the housing goes back together. Gear mesh and preload are judged by pattern and feel, which is why a technician with gear setup experience should handle them. After assembly, keep the first miles gentle and recheck the ring gear bolt torque once the gears have run in.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | G/235-2050L |
| Axle type | Dana 30 |
| Included components | Timken bearings, ring gear bolts, shims, pinion seal |
| Locker | Eaton E-Locker offered with this kit |
Vehicle fitment
No vehicle list is provided for this kit. It is sized for Dana 30 axles, so confirm your housing is a Dana 30 and matches the option you select before you choose it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Setting gear mesh and bearing preload is specialist work. Have a shop with gear setup experience install the kit, and allow a break-in period after the new gears are set.
What’s included
The kit includes Timken bearings, ring gear bolts, shims and a pinion seal.
Not included: the ring and pinion gear set itself, since this kit provides the installation components.








