Select your vehicle
-13%

G2 Dana 30/44 JK 5.13 Ring and Pinion Minor Installation Kit – 4-JK-513M

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Based on the product title and description, fits Jeep Wrangler JK models from 2007 to 2018
  • 5.13 ratio, front and rear gear sets with minor installation kits for both axles
  • Part number G/24-JK-513M
  • Covers Dana 30 front and Dana 44 rear

Description

Overview

The G2 Axle and Gear Dana 30/44 JK 5.13 minor installation kit, part G/24-JK-513M, is a complete gear swap for a Jeep Wrangler JK. Based on the product title and description, it covers the front and rear axles of 2007–2018 Jeep Wrangler JK models.

The kit is a complete gear change in one purchase, with front and rear gear sets and minor installation kits for both axles. The gears are rated at 5.13.

Key features

  • Front and rear gear sets in one purchase
  • Minor installation kits for both axles
  • Designed for use with oversized tires and high-performance engines.
  • Built from the same G2 performance ring and pinion design

Gearing for a JK build

Front and rear gearing work as a pair in a four-wheel-drive Wrangler. When both axles use the same ratio, each wheel turns at a matched speed through the transfer case, which keeps the driveline calm during turns. Changing both at once simplifies the match and avoids a mismatch that can stress the transfer case.

A full front and rear change is a larger job than a single axle swap, so plan time for two sets of pattern checks and fluid changes. Tire size should be settled before ordering, since the ratio chosen depends on how the vehicle is driven. Keep a parts list handy when comparing kit contents with the work ahead.

  • Settle tire size before ordering
  • Plan two sets of pattern checks
  • Replace fluids in both axles after the swap

Specifications

Brand G2 Axle and Gear
Part number G/24-JK-513M
Axle location Front and rear
Kit type Minor installation kit
Gear ratio 5.13
Axle types Dana 30 front, Dana 44 rear

Vehicle fitment

Based on the product title and description, this kit is for Jeep Wrangler JK models from 2007 to 2018.

Other Wrangler generations, including the JL (2018–2022), are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Two axles mean two sets of pinion depth, backlash and carrier preload checks. A shop with gauges and a pattern-check procedure should handle both, and both axles should be broken in gradually after the swap.

What’s included

Front and rear gear sets for the JK, along with the minor installation kits for both axles.

Not included: the master install parts, such as the full bearing set, pinion nut and other items not listed in the minor kits.

Fitment

VehicleYearsTrims
Jeep Wrangler (JK) likely fits2007–2018All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does this 5.13 kit fit a 2007–2018 Jeep Wrangler JK?

Based on the product title and description, yes. It covers the front and rear axles for JK models of those years. Confirm your year, model and trim before ordering, since other Wrangler generations are not covered.

Does the kit include gears for both axles?

Yes. The kit includes front and rear gear sets plus the minor installation kits for both axles, so one purchase covers the full gear swap for the JK.

Is this a good starting point for a complete gear swap?

Yes, it covers both axles in one purchase. The minor kits cover the install parts, so check them against your existing hardware before starting.

Is this kit the same as a master install kit?

No. It is a minor installation kit. A master kit adds more of the parts needed for a full rebuild, such as the complete bearing set, so check the contents against your install before buying.

Do the front and rear ratios need to match?

Yes. Front and rear ratios should be the same so the axles turn at matching speeds through the transfer case, which avoids driveline binding. Using a kit that sets both axles to one ratio keeps that match simple.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon