Overview
The G2 Axle and Gear 35-2039 is a master ring and pinion installation kit for the Ford 8 inch rear axle. It bundles the install parts a gear change usually needs, including a shim kit, a replacement pinion nut, a crush sleeve, pinion and carrier bearings, and sealing and locking compounds.
The kit is installation hardware rather than a gear set. It is made for Ford axles, and the 8 inch axle size is the main match point to check.
Key features
- Master kit with bearings for a Ford 8 inch rear axle
- Proper shim kit for pinion and carrier setup
- Replacement pinion nut and crush sleeve
- Pinion seal, pinion bearings and carrier bearings
- Ring gear bolts, silicone sealer, Loctite and gear marking compound
Ford 8 inch setup considerations
The axle size is the first thing to confirm before any gears are bought, because the kit and gear set both have to match the housing. Measure the housing, check the ring gear bolt pattern and inspect the carrier bearing bores before the job starts. Matching these details prevents a mismatched gear set from reaching the bench.
During the rebuild, pinion depth, carrier preload and backlash all depend on each other. Gear marking compound shows the tooth contact, and a break-in period after assembly lets the teeth seat. Inspect the pinion yoke and seal surface for grooves before installing the new seal, since a damaged yoke can leak even with a new seal.
- Confirm axle size before ordering gears
- Inspect the carrier bearing bores for wear
- Check the pinion yoke surface for grooves
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2039 |
| UPC | 631410095883 |
| Axle manufacturer | Ford |
| Axle type | Ford 8 Inches |
| Axle location | Rear |
| Kit type | Master kit with bearings |
Vehicle fitment
Axle size decides fit, and no model years are named for this kit. Check your axle size before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, carrier preload and backlash all need setting, and gear marking compound shows whether tooth contact is correct. A professional should handle gear setup and break-in on a Ford 8 inch rear.
What’s included
The kit includes a shim kit, replacement pinion nut, crush sleeve, pinion seal, pinion bearings, carrier bearings, ring gear bolts, silicone sealer, Loctite and gear marking compound.
Not included: A ring and pinion gear set is not included with this kit.












