Overview
The G2 Axle and Gear 25-2014 is a minor ring and pinion installation kit for the Ford 7.5 Inches rear axle.
Smaller Ford rear axles use the 7.5 inch design, which this 25-2014 minor kit supports. G2 includes a shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and marking compound.
G2’s 25-2014 is the minor kit for the Ford 7.5 inch rear axle. Its parts are a proper shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound. Since bearings are left out, the kit suits an installer who has checked that the existing bearings can stay in service.
Key features
- Minor kit for the Ford 7.5 Inches axle (rear)
- Meant for jobs that keep the existing bearings
- Shim kit for setting pinion depth and carrier position
- Pinion nut, crush sleeve and pinion seal
- Ring gear bolts and silicone sealer
- Loctite and gear marking compound
Ford and GM 7.5 inch differences
Two 7.5 inch rear designs exist, and their parts are not interchangeable. Checking the axle tag, the housing shape, and the pinion flange before buying prevents the wrong kit from reaching the bench. Mixing parts between designs can leave the gears set to the wrong specification even when they appear to fit.
A minor kit suits a rebuild that keeps the original bearings, so bearing condition should be confirmed first. Smooth rotation with no play is the goal. Keep the old pinion nut and seal out of the reuse pile, and set the crush sleeve preload with the method that suits your tools.
- Compare the axle tag before ordering
- Confirm bearing play by hand
- Replace the pinion nut and seal
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2014 |
| UPC | 631410094886 |
| Kit type | Minor kit |
| Axle location | Rear |
| Axle type | Ford 7.5 Inches |
| Axle manufacturer | Ford |
| Manufacturer part number | G/225-2014 |
Vehicle fitment
It fits the rear Ford 7.5 inch axle. The GM 10 bolt 7.5 inch has its own kit, 25-2015.
Confirm your vehicle’s axle type and year before ordering.
Installation notes
Do not mix the two 7.5 inch designs, since the Ford and GM parts differ. Use the shims and marking compound to confirm the setup of the Ford axle.
Before starting the 25-2014 job on the Ford 7.5 Inches axle, gather a dial indicator, a torque wrench and clean gear oil. Note the old pattern on the teeth, because the shims in the 25-2014 are the means of correcting the new one. The old nut and seal are replaced. Keep races paired with bearings.
What’s included
- Proper shim kit
- Pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer
- Loctite thread locker
- Gear marking compound
Not included: bearings and gears; the 25-2014 is a minor kit for the Ford 7.5 Inches axle.







