Overview
The G2 Axle and Gear 35-2036 is a master ring and pinion installation kit for Dana 70 HD rear axles, and HD is part of the title. The kit supplies bearings, shims, a seal and fasteners for a ring and pinion replacement but does not include the gear set.
Plan for the gear set to be supplied separately, and confirm the axle is the HD version before you start.
Key features
- Master kit with bearings for pinion and carrier positions
- Shim kit, pinion nut and crush sleeve for setup
- Pinion seal and carrier bearings with races
- Ring gear bolts, Loctite, gear marking compound and silicone sealer
Choosing the HD version
The HD designation matters because heavy-duty Dana 70 housings and parts can differ from the standard version in how they fit together. Before buying, measure or inspect the housing and confirm the axle is the HD version. Matching the kit to the correct axle prevents wasted time when the gears arrive and the housing does not line up with the parts.
A Dana 70 HD gear set is a significant job, so plan the work in order: remove the axle, inspect the housing, install the bearings, set preload and tooth contact, then reinstall. Keep the parts organized and label the shims. Choose gears that match the axle size and ratio, and check the carrier for wear before reusing it.
- Confirm the axle is the HD version
- Inspect the housing bore and bearing seats
- Plan for a separate gear set
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2036 |
| UPC | 631410095869 |
| Axle type | Dana 70 HD, the heavy-duty version of the Dana 70 axle |
| Axle location | Rear |
| Popular axle manufacturer | Dana |
| Kit type | Master kit with bearings |
Vehicle fitment
Confirm the axle is the HD version and verify your vehicle’s year, model and trim before starting.
Axle names such as Dana 70 HD do not show which vehicles use the axle.
Installation notes
Dana 70 HD gear sets are a shop job: pinion preload, carrier preload and tooth contact must be set and checked before the axle goes back into service, followed by a break-in period. Keep the truck on stands rated for its weight while the axle is apart.
What’s included
The kit includes pinion and carrier bearings, a shim kit, replacement pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound.
Not included: the gears, which must be supplied separately.










