Overview
The G2 Axle and Gear 25-2035 is a Dana 70 minor ring and pinion installation kit for a rear axle. It supplies the setup parts for a gear swap on a Dana 70 differential, and it is aimed at an installer working on a newer vehicle whose bearings do not need to be changed.
G2 packs into this kit the small parts that tend to be missing from a general auto parts store: a proper shim kit, a replacement pinion nut, a crush sleeve, a pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound. Anyone shopping for a Dana 70 ring and pinion install kit, sometimes called a gear install kit or setup kit, can use this one as the parts list for the job.
Key features
- Minor kit made for installs that keep the existing bearings
- Built for the Dana 70 axle, rear position
- Proper shim kit for setting pinion depth and backlash
- Fresh pinion nut, crush sleeve and pinion seal
- Ring gear bolts, silicone sealer and Loctite included
- Gear marking compound for checking the contact pattern
Pinion depth and backlash
Pinion depth and backlash are the two settings that decide whether a rear gear set runs quietly and lasts. The shims and marking compound in the kit support those settings. Work through depth first, then backlash, and confirm the pattern on the teeth before the cover goes back on.
Choosing a Dana 70 kit by axle is only part of the job. Inspect the carrier bearings, the pinion seal bore and the housing for cracks. Fresh gear oil is needed once the housing is closed, and the old fluid should be drained and checked for metal particles, which can point to wear in the gears.
- Set pinion depth before backlash
- Inspect carrier bearings and seal bore
- Check old gear oil for metal particles
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2035 |
| UPC | 631410095081 |
| Product type | Minor ring and pinion installation kit |
| Kit class | Minor kit |
| Axle manufacturer | Dana |
| Axle type | Dana 70 |
| Axle location | Rear |
| Kit contents | Shim kit, replacement pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite, gear marking compound |
Vehicle fitment
G2 Axle and Gear gives no list of vehicles for the 25-2035 and labels it Universal Fit, meaning it is chosen by axle rather than by a single vehicle. The axle it is made for is the Dana 70 in the rear.
The 25-2035 does not cover other Dana axles, including the Dana 60 or Dana 80, and it is not the kit for the Dana 70 HD, which has its own number. Confirm your vehicle’s year, model and trim, and the axle under it, before ordering.
Installation notes
A ring and pinion swap depends on correct pinion depth, preload and backlash. The shim kit and gear marking compound in the 25-2035 are there for that setup, and a trained installer is the usual choice for gear work on a Dana 70.
What’s included
- Shim kit
- Replacement pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer
- Loctite
- Gear marking compound
Not included: the ring and pinion gear set and bearings; this kit is meant for jobs where the bearings stay.








