Overview
The G2 Axle and Gear 25-2046B is an OE-labeled minor ring and pinion install kit for Ford 10.5-inch rear axles. It covers the nut, seals, crush sleeve, shims, bolts and compounds used in a minor gear set install.
Match the 10.5-inch rear axle to your Ford’s year, model and trim before starting the job.
Checking the rear axle first
Ford 10.5-inch rear axles are used in several trucks and SUVs, and gear sets for them are sized by the axle, not only by the model name. Before buying, locate the axle tag or housing casting and confirm the ring gear diameter and axle size against your vehicle. Matching the axle first prevents ordering a kit that cannot be set up correctly.
Once the housing is open, check the carrier bearing bores, the bearing caps and the pinion bearing cups for wear or damage. Clean the housing thoroughly so the shims sit flat and the ring gear seats evenly. A shop that works on Ford rear gears can judge whether the existing carrier is fit for reuse. Use fresh gear oil after the install and check for leaks during the first few drives. Keep the bolt torque sequence from the service procedure.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2046B |
| UPC | 631410126655 |
| Axle size | 10.5-inch |
| Position | Rear |
Vehicle fitment
The kit is sized for a 10.5-inch Ford rear axle. Match the axle size and your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shims control pinion depth and backlash, so a shop that sets up Ford rear gears should handle the install.
What’s included
The kit has a pinion nut, pinion seal, crush sleeve, pinion shims, carrier shims, ring gear bolts, thread locking compound, gear marking compound and silicone sealer.
Not included: The ring gear and pinion gears are sold separately from this kit.








