Overview
The G2 Axle and Gear 25-2029 is a minor ring and pinion installation kit for the Chrysler 8.25 Inches rear axle.
Chrysler’s 8.25 inch rear axle gets the 25-2029 minor kit. It carries a shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound; bearings are separate.
G2’s 25-2029 is the minor kit for the rear Chrysler 8.25 inch axle. It holds a proper shim kit, nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and marking compound. A master kit with bearings, 35-2029, is listed by G2 for 27 or 29 spline axles of the same size. Check the housing size before ordering, since this Chrysler 8.25 inch kit is intended for the rear axle only.
Key features
- Minor kit for the Chrysler 8.25 Inches axle (rear)
- Meant for jobs that keep the existing bearings
- Shim kit for setting pinion depth and carrier position
- Pinion nut, crush sleeve and pinion seal
- Ring gear bolts and silicone sealer
- Loctite and gear marking compound
Spline count and housing
Spline count and housing size decide whether a Chrysler 8.25 inch axle will take a given gear set and bearing package. Measure or confirm the spline count of the axle shafts before ordering, and compare the housing to the axle tag or markings. Guessing here can lead to wasted parts and a second trip under the truck.
A minor kit is the right fit when the bearings are sound and the housing is correct. Clean the carrier and check the case for cracks or worn bearing bores before shimming. A damaged case is a reason to stop, since no shim can fix a bore that has moved.
Keep all the old parts labeled and in order as they come off. Small differences in washers and shims often matter in the final setup.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2029 |
| UPC | 631410095029 |
| Kit type | Minor kit |
| Axle location | Rear |
| Axle type | Chrysler 8.25 Inches |
| Axle manufacturer | Chrysler |
| Manufacturer part number | G/225-2029 |
Vehicle fitment
It is a minor kit for the rear Chrysler 8.25 inch axle. Check the spline count and housing size against your axle before ordering.
Confirm your vehicle’s axle type and year before ordering.
Installation notes
Because this minor kit omits bearings, the old ones go back in, so look them over carefully. Shim for depth and verify the pattern.
Before starting the 25-2029 job on the Chrysler 8.25 Inches axle, gather a dial indicator, a torque wrench and clean gear oil. Note the old pattern on the teeth, because the shims in the 25-2029 are the means of correcting the new one. The old nut and seal are replaced. Keep races paired with bearings.
What’s included
- Proper shim kit
- Pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer
- Loctite thread locker
- Gear marking compound
Not included: bearings and gears; the 25-2029 is a minor kit for the Chrysler 8.25 Inches axle.







