Overview
The G2 Axle and Gear 30-9024 is a rear wheel bearing kit for a Dodge Ram or Ram 2500 or 3500 with an AAM 11.5 inch series axle. The kit covers one side of the axle and is a direct-fit replacement for the 2003–2010 Dodge Ram 2500 and 3500 and the 2011–2013 Ram 2500 and 3500.
G2 says its wheel bearing kits bring together the primary items needed to replace worn wheel bearings, and that it builds them with Timken tapered bearings and seals for a reliable rebuild. For a heavy-duty truck with an AAM 11.5 inch rear axle, the 30-9024 gives a one-side service kit in a single part number.
Key features
- Rear wheel bearing kit for the AAM 11.5 inch series axle
- Covers one side of the axle
- Direct fit for Dodge Ram and Ram 2500 and 3500 trucks
- Includes the primary items for a wheel bearing replacement
- G2 names Timken tapered bearings and seals in its kits
Signs the bearings are worn
A worn rear bearing on a heavy-duty Ram often announces itself with a growl or hum that rises with speed and changes when the truck turns. Play in the wheel when it is rocked at the top and bottom is another sign, especially on a truck that carries or tows heavy loads.
Look at the inside of the wheel for grease that has leaked past a failing seal, and check the brake parts for contamination. A bearing that runs hot after normal driving should be inspected before the next trip, since heat can damage the races and the seal.
- Growl or hum that changes with speed
- Play felt when the wheel is rocked
- Grease on the inside of the wheel
- Heat at the hub after normal driving
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 30-9024 |
| UPC | 631419116640 |
| Product type | Wheel bearing kit |
| Position | Rear |
| Axle | AAM 11.5 inch series |
| Quantity | 1 side |
| Bearing type | Timken tapered bearings (G2 states its kits use them) |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2003–2010 Dodge Ram 2500, the 2003–2010 Dodge Ram 3500, the 2011–2013 Ram 2500 and the 2011–2013 Ram 3500. All four are covered by this one rear axle kit.
The 30-9024 does not cover Ram 2500 or 3500 trucks outside those model years, Ram 1500 trucks, or front axles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing a wheel bearing at the rear of a heavy-duty truck means removing the axle shaft or hub assembly, seating the new bearing and seal, and checking end play or preload as the design requires. Hardware and special tools are not included with this kit, and because it serves one side, an axle serviced on both sides needs a second kit.
What’s included
- Wheel bearings and seals for one side of the axle, per G2’s description of its wheel bearing kits
Not included: a second kit for the opposite side, and any hardware not described by G2.








