Overview
The G2 Axle and Gear 35-2027B is a master ring and pinion installation kit for the Chrysler 8-inch axle, aimed at the Ram 1500 from 02 up in an IFS application. Confirm whether your axle is front IFS or rear before ordering. The kit contains the bearings, shims, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound used in a ring and pinion replacement.
Key features
- Master kit with pinion and carrier bearings
- Shim kit with replacement pinion nut and crush sleeve
- Pinion seal and ring gear bolts included
- Silicone sealer, Loctite and gear marking compound included
Front or rear setup
IFS front axles and rear axles are built differently, with different housings, mounting points and pinion angles. A gear set or shim pack that suits one position will not suit the other, which is why position needs to be settled before any parts are bought. If the axle position is unclear, look at the axle housing, the mounting bracket and the driveline connection before deciding.
When the position is confirmed, the rest of the job is straightforward to plan. Front setups often involve steering and driveshaft clearance checks, while rear setups focus on pinion angle relative to the driveshaft. Inspect the carrier bearings and the axle seals while the housing is open, since replacing them during the same job avoids a second teardown.
- Confirm axle position from the housing itself
- Check driveshaft angle before final assembly
- Replace axle seals when the carrier is open
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2027B |
| UPC | 631410095753 |
| Axle manufacturer | Chrysler |
| Axle type | Chrysler 8 Inches |
| Axle location | Rear |
| Kit type | Master Kit With Bearings |
Vehicle fitment
The kit is aimed at the Ram 1500 from 02 up, but its axle position is unsettled, with rear and IFS front applications both in play. Confirm which position your axle is before ordering.
Other Ram models and years are not covered. Check the year, model, trim and axle position against your truck before buying.
Installation notes
Bearing preload and gear setup need measuring tools, and the axle position should be confirmed first because front and rear setups differ. Professional installation is the safer route.
What’s included
- Pinion and carrier bearings with races
- Shim kit
- Replacement pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer, Loctite and gear marking compound
Not included: the matched ring gear and pinion set, which has to come from another source.











