Overview
The FUEL Off-Road Stroke D612 18×9 is an aluminum mesh wheel, part number MHTD61218909845, finished in gloss black with candy red. It is 18 inches in diameter and 9 inches wide, with a -12 offset and a 106 center bore.
The wheel is offered in 6 on 135 and 6 on 139.7 bolt patterns. Offset, backspacing and center bore set how it matches a hub.
Key features
- 18 inch diameter and 9 inch width
- Aluminum mesh style
- Offset of -12 with 4.5 backspacing
- Center bore of 106
- Gloss black with candy red finish
Test fitting before the first drive
Test fitting means mounting the wheel and tire, then turning the steering from lock to lock and compressing the suspension by hand. Look for contact at the brake caliper, the inner fender, the control arms and the outer lip. Marks on the inner barrel or tire sidewall show where the next adjustment is needed.
Tire choice changes fit more than many owners expect. A wider tire or taller sidewall fills more of the space, and a tire with a different overall diameter changes how the wheel sits. Consider wheel spacers only after confirming the offset and hub measurements, since spacers add load on studs. Torque lug nuts after the first drive and inspect again after rough trail use.
- Check the brake caliper
- Turn lock to lock
- Recheck torque after the first drive
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD61218909845 |
| Diameter | 18 inches |
| Width | 9 inches |
| Offset | -12 |
| Center bore | 106 |
| Backspacing | 4.5 |
| Style | Mesh |
| Finish | Gloss Black/Red |
| Bolt pattern | 6 on 5.5/6 on 135 |
| Construction | Aluminum |
Vehicle fitment
No vehicle year, make or model is attached to this wheel. Its entry reads universal fit, so check the 6 on 135 or 6 on 139.7 pattern and the 106 center bore against your hub.
Offset and backspacing control how the wheel clears brakes and suspension parts, so measure clearance before mounting. Confirm your vehicle’s year, model and trim before ordering.
What’s included
This wheel is marked as universal fit. Measure your hub for the 6 on 135 or 6 on 139.7 pattern and the 106 center bore, then check your vehicle’s year, model and trim.











