Overview
The FUEL Off-Road Maverick 20×9 in black milled finish is a six-lug aluminum spoke wheel sized 20 by 9 inches. Its part number is MHTD53820909857, with the title code D53820909857, and the bolt patterns are 6 on 5.5 and 6 on 135.
The center bore is 106, the offset is 20 and the backspacing is 5.8. These three measurements decide how the wheel seats on the hub and how far it sits inside the fender, so match them to the vehicle before ordering. The finish is black with a milled face.
Key features
- Black milled finish.
- Aluminum spoke design.
- 20-inch diameter and 9-inch width.
- Six-lug bolt patterns: 6 on 5.5 and 6 on 135.
- Center bore of 106.
- Offset 20 and backspacing 5.8.
Six-lug hub considerations
Six-lug hubs usually center the wheel on a larger bolt circle, and the two patterns offered here differ in their stud spacing. A wheel must match one pattern exactly, because a near miss will allow the wheel to sit on only some studs. Before ordering, count the studs and measure across from one to the one opposite, then compare that with the pattern.
Lug nuts should seat squarely against the wheel. Torque them in a star sequence and recheck after the first few trail runs, since a wheel can settle slightly against the hub. Inspect the stud threads for damage when the wheel is removed.
- Count studs and measure the spacing
- Use a star pattern when tightening
- Recheck torque after the first runs
- Inspect studs for thread damage
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD53820909857 |
| Model | Maverick |
| Diameter | 20 inches |
| Width | 9 inches |
| Style | Spoke |
| Finish | Black |
| Construction | Aluminum |
| Bolt pattern | 6 on 5.5 / 6 on 135 |
| Center bore | 106 |
| Offset | 20 |
| Backspacing | 5.8 |
Vehicle fitment
This is a universal-fit wheel with no year, make, model or trim attached. Check the 6 on 135 and 6 on 5.5 patterns, center bore 106, offset 20 and backspacing 5.8 against your truck before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount it only to a hub that matches one of the two six-lug patterns. Check the 106 center bore and 20 offset against brake caliper and fender clearance. Confirm lug seat style and thread pitch before fitting the lug nuts.
What’s included
Confirm the contents on hand against your installation; tires, lug nuts, center caps and valve stems are the parts to verify.









