Overview
The FUEL Off-Road Rage D711 is a 20 x 10 inch aluminum spoke wheel in a Black/Milled finish, part number MHTD71120005747. Its listed bolt patterns are 5 on 5.0/5.5 and 5 on 5.5/139.7, so the hub must match one of them.
Offset -18 and backspacing 4.8 determine how the wheel sits behind the hub and how it clears suspension and brake parts. Measure those against your own vehicle before choosing this wheel.
Key features
- Aluminum construction in a 20-inch diameter and 10-inch width
- Spoke style in a Black/Milled finish
- Two bolt pattern entries: 5 on 5.0/5.5 and 5 on 5.5/139.7
- Center bore 87 for hub centering
- Offset -18 and backspacing 4.8 listed
Offset and suspension clearance
Offset decides how far the mounting face sits from the wheel centerline, which changes how the tire sits against the fender and suspension. Negative offset pushes the wheel outward, so it can contact steering knuckles, tie rods and brake hardware on some setups. Measure clearance at full lock and at full suspension compression.
Backspacing works together with offset to show how much of the wheel sits behind the hub. Changes in backspacing can also shift load onto the wheel bearings and ball joints. Recheck the alignment after fitting new wheels, because tire scrub and steering feel can change.
- Check clearance at full lock
- Watch for rubbing on the inner fender
- Inspect tie rod ends for play after fitment
- Recheck alignment after mounting
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD71120005747 |
| Model | Rage D711 |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 5 on 5.0/5.5 |
| Bolt pattern 2 | 5 on 5.5/139.7 |
| Offset | -18 |
| Center bore | 87 |
| Backspacing | 4.8 |
| Style | Spoke |
| Finish | Black/Milled |
| Construction | Aluminum |
Vehicle fitment
Universal fit is the designation here, and offset with bolt pattern is what determines suitability for a particular truck or SUV.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm both bolt pattern entries, including the 139.7 value, against your hub before mounting. Check the 87 center bore and the -18 offset against your suspension and brake clearance.
What’s included
Only the wheel is described, with no tire, lug nuts or caps mentioned.











