Overview
The FUEL Off-Road 20×10 Coupler wheel, part number MHTD55620007050, is a 20-inch aluminum spoke wheel with a 10-inch width and black machined finish. Its two listed bolt patterns are 5 on 5.5 and 5 on 150, which covers five-lug hubs of either pattern once the hub is measured.
The range covers many bolt pattern and offset mixes, and this 20×10 version has a -12 offset, 5 backspacing and a 110 center bore. No vehicle is confirmed for it, so measure your hub and judge fit from these figures.
Key features
- 20 by 10 inch aluminum spoke wheel
- Black machined finish
- Bolt pattern entries of 5 on 5.5 and 5 on 150
- Offset of -12 with backspacing of 5
- Center bore of 110
- Coupler model name from FUEL Off-Road
Measuring your hub first
Before a 20-inch wheel goes on, the hub has to match it in three places: the stud count and spacing, the center bore and the offset. Measure the pattern across the studs or lug holes, then compare the center bore with the hub diameter. A bore smaller than the hub will not seat, and a larger bore needs a hub-centric ring to center the wheel. Offset sets where the mounting face sits, which affects clearance to brake calipers, control arms and the inner fender.
Width changes how the tire sits as well. A 10-inch wide wheel with a negative offset pushes more of the tire outward, so check fender room and steering lock before fitting larger tires. Confirm the lug seat type matches your studs, since a mismatched seat can loosen under load. Re-torque the nuts after the first few drives.
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD55620007050 |
| Model | Coupler |
| Wheel diameter | 20 Inches |
| Wheel width | 10 Inches |
| Style | Spoke |
| Finish | Black Machined |
| Construction | Aluminum |
| Bolt pattern | 5 on 5.5 |
| Bolt pattern 2 | 5 on 150 |
| Offset | -12 |
| Backspacing | 5 |
| Center bore | 110 |
Vehicle fitment
No vehicle is confirmed for this wheel. Match the year, model and trim of your truck or SUV before buying, using the bolt pattern and center bore as the deciding checks.
Confirm your vehicle’s bolt pattern, center bore and offset before ordering.
Installation notes
A 110 center bore must be at least as large as the hub it mounts on. If your hub is smaller, a hub-centric ring is the usual solution, and brake and fender clearance should be measured with the -12 offset in mind.
What’s included
Only the wheel is covered here. Tires, lug nuts and center caps are absent, so inventory the delivery against your installation plan.









