Overview
The FUEL Off-Road Stroke D612 18×9 is an aluminum wheel in gloss black with candy red accents. Part number MHTD61218902650 is 18 inches across and 9 inches wide, with an offset of 1, a 78 center bore and backspacing of 5. The bolt patterns are 5 on 114.3 and 5 on 127.
The mesh face shows the candy red finish through its openings. Match the 78 center bore to your hub, and use a hub-centric ring if the hub bore is larger. Confirm the bolt pattern and bore before mounting, since fit must be verified separately.
Key features
- Aluminum construction in a Mesh style
- 18-inch diameter and 9-inch width
- Gloss Black/Red finish with candy red accents
- Offset of 1 and backspacing of 5
- Center bore of 78
- Bolt patterns: 5 on 114.3 and 5 on 127
Hub bore, rings and lug seats
A center bore that is smaller than the hub can prevent the wheel from seating, while a bore that is too large leaves the wheel floating on the lug studs. Hub-centric rings bridge the gap and carry the load on the hub instead of the studs. Choose rings that match the bore and hub diameters precisely, and check them after each wheel removal.
Lug seat style matters as much as bore. Conical seats, ball seats and flat seats each need matching lug nuts, and a mismatch can seat unevenly and loosen. Inspect the bore and mounting face for corrosion and dents when the wheel is off. Torque lug nuts evenly in a star pattern and recheck after the first drive.
- Match rings to bore and hub diameters
- Check lug seat style before tightening
- Inspect the mounting face when off
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD61218902650 |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Offset | 1 |
| Backspacing | 5 |
| Center bore | 78 |
| Bolt pattern (title) | 5 on 114.3 and 5 on 127 |
| Bolt pattern (specification) | 5 on 4.5/5 on 5 |
| Style | Mesh |
| Finish | Gloss Black/Red |
| Construction | Aluminum |
Vehicle fitment
This wheel is a universal-fit design. Confirm fit for your vehicle’s year, model and trim before ordering, and check the bolt pattern and center bore against your hub.
Because the bolt pattern and center bore decide fit, confirm them against your vehicle before choosing this size. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Make sure the 78 center bore clears your hub’s pilot, or use a hub-centric ring to close the gap. Choose lug hardware that suits the wheel’s seat type.
What’s included
One 18×9 Stroke D612 wheel in gloss black with candy red is described.
Not included: No tires, lug nuts, center caps or hub rings are mentioned for this part number.











