Overview
The FUEL Off-Road Maverick 18×9 in chrome, part number MHTD53618909850, is a spoke wheel 18 inches in diameter and 9 inches wide. It has 6 on 135 and 6 on 5.5 bolt patterns, a 106 center bore, an offset of 1 and a backspacing of 5.
The Maverick suits owners of six-lug trucks and SUVs who want a chrome spoke look. Chrome is the finish of this wheel. Check bolt pattern and offset against your hub before ordering, since those set the fit for this single wheel.
Key features
- Chrome finish on an aluminum spoke wheel
- 18-inch diameter with 9-inch width
- Six-lug patterns: 6 on 5.5 and 6 on 135
- Offset 1 and backspacing 5
- Center bore of 106.
Caring for chrome wheels
Chrome finishes need gentler cleaning than painted or powder-coated wheels. Use a pH-neutral wheel cleaner, a soft brush and plenty of water, and avoid abrasive pads or strong acid cleaners that can dull or pit the plating.
Brake dust and road salt cling to chrome faces, so rinse after every wet or muddy drive. Check the plating for chips or bubbling, since small damage can spread under moisture. Avoid cleaning hot wheels in direct sun, because heat can leave water spots.
Mounting work also matters. Use a padded surface when the wheel is off the vehicle, and keep tire levers away from the face to avoid scratches.
- Rinse after road salt exposure
- Dry with a soft microfiber cloth
- Inspect the lip for chips at each tire rotation
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD53618909850 |
| Style | Spoke |
| Finish | Chrome |
| Construction | Aluminum |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Offset | 1 |
| Backspacing | 5 |
| Center bore | 106 |
| Bolt pattern | 6 on 5.5 / 6 on 135 |
Vehicle fitment
No vehicle is tied to this chrome wheel. Universal Fit means it is not built for one vehicle, so hub bolt pattern, bore and offset decide compatibility.
Measure your hub bolt pattern and bore, then compare them with the 6 on 135, 6 on 5.5, 106 and offset 1 figures here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Verify the 106 bore against your hub, or use hub-centric rings where the hub bore is larger. Offset 1 and backspacing 5 set the clearance to the fender and brake parts, so check it before mounting. Protect the chrome face by working on a padded surface, and confirm the lug seat type before tightening.
What’s included
This entry covers one wheel. Center caps and lug nuts are not part of it, so confirm what you need before ordering.









