Overview
The FUEL Off-Road D517 Krank in 20×9 inches uses a 6 on 135 and 6 on 5.5 bolt pattern pair and carries part number MHTD51720909857. FUEL Off-Road classifies it as universal fit, which means no specific vehicle is named, so the hub measurements decide whether it works.
The matte black milled Krank styling is paired with a 106 center bore, a 20 offset and 5.8 backspacing. Those figures set where the wheel sits relative to the hub and how much clearance the tire has against the fender and brakes.
Key features
- 20-inch diameter, 9-inch width and aluminum construction.
- Two bolt patterns: 6 on 135 and 6 on 5.5.
- Matte black milled finish.
- Krank style.
- 106 center bore.
- Offset of 20 and backspacing of 5.8.
- Universal fit wheel with no particular vehicle applied.
Lifted trucks and rubbing
Lift kits, wider tires and aftermarket control arms all change where the tire sits in the wheel well. Because this wheel is universal fit, the result depends on the hub and the existing setup rather than a named vehicle. Measure the current wheel’s offset and backspacing before comparing, since a small change can bring the tire into contact with the fender, brake caliper or suspension.
The 106 center bore and the 6 on 135 or 6 on 5.5 pattern decide whether the wheel seats properly on the hub. Once the pattern is confirmed, test the wheel at full steering lock and under load, and look for rub marks on the inner lip and fender edge. A wheel that seats flat with clean clearance is a stronger starting point than one that only looks like a match.
- Measure current offset and backspacing first
- Test at full steering lock
- Check for rub marks after the first drive
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD51720909857 |
| Style | Krank |
| Diameter | 20 inches |
| Width | 9 inches |
| Bolt pattern | 6 on 5.5/6 on 135 |
| Center bore | 106 |
| Offset | 20 |
| Backspacing | 5.8 |
| Construction | Aluminum |
| Finish | Matte black milled |
| Fitment | Universal fit |
Vehicle fitment
No make, model or year is tied to this wheel. Universal fit means the bolt pattern, center bore and offset must be compared with your hub and your truck’s dimensions before deciding the wheel suits it.
Lifted suspension and larger tires change clearance, so measure your current wheel’s offset and backspacing before comparing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Sit the wheel on the hub before any tire is mounted to confirm the 6 on 135 or 6 on 5.5 pattern lines up. Check inner fender and caliper clearance at full steering lock, and confirm the lug nut seat style matches the wheel’s lug holes.
What’s included
The wheel is the only item covered. Lug nuts, center caps and tires are not included.
Not included: Tires and lug hardware must be bought separately from this wheel.









