Overview
The FUEL Off-Road Beast D564 is a 20 by 9 inch aluminum spoke wheel, part number MHTD56420901750, with an 8 on 170 bolt pattern and a 125 center bore. The finish is black machined with a dark tint.
The offset is 1 and the backspacing is 5. Because the wheel has a single eight-lug pattern, check the studs and bore of your hub before choosing it.
Key features
- Spoke style wheel, 20 by 9 inches
- Single eight-lug bolt pattern, 8 on 170
- 125 center bore
- Black machined finish with a dark tint
- Offset 1 and backspacing 5
Studs, bores and rings
With an eight-lug pattern, every stud must seat evenly, and a stud that is bent or damaged will prevent a flat seat. Check the studs for bends or thread damage before mounting. The center bore carries the wheel’s centering, so a bore larger than the hub relies on hub-centric rings to keep the load even.
Eight-lug wheels often run with larger tires and heavier loads, so lug torque matters. Tighten in a star sequence and recheck after the first drives. Clean the hub face and the rear of the wheel before mounting. After trail use, look for cracks at the spoke roots and bends at the lip.
- Inspect studs for bends or thread damage
- Use hub-centric rings when the bore is larger
- Tighten lug nuts in a star sequence
- Recheck torque after the first drives
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD56420901750 |
| Model line | Beast D564 |
| Style | Spoke |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Offset | 1 |
| Backspacing | 5 |
| Center bore | 125 |
| Bolt pattern | 8 on 170 |
| Finish | Black/Machined |
| Construction | Aluminum |
Vehicle fitment
No vehicle is named for this wheel, so no years, makes or models are confirmed. It is marked Universal Fit. The 8 on 170 pattern and 125 center bore are the measurements to match against your hub before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the eight studs to the 170 pattern and check the 125 center bore against the hub. A centering ring is needed if the hub bore does not match, so confirm that before the wheel is mounted.
What’s included
Tires, lug nuts and center caps should be sourced before mounting.









