Overview
The Fox Racing Shox 983-02-088 is a 2.0 Performance Series ATS steering stabilizer complete kit with brackets included. ATS stands for Adjustable Through Shaft, a single unit that takes the place of two conventional opposing stabilizers. Confirm fit for your steering setup before deciding whether the kit suits your vehicle.
The design cancels unwanted steering forces in both directions. The integrated reservoir adds fluid capacity and supports cooling during demanding use. The kit also includes relocating hardware that moves the stabilizer up and out of the way.
The 5/8 inch shaft and high-flow piston are the main hardware details.
Key features
- Adjustable Through Shaft design that replaces two opposing stabilizers
- 24 clicks of external adjustment to tune the steering feel
- Integrated external reservoir for extra fluid capacity and cooling
- High-flow piston and aluminum body
- Relocating hardware with a new track bar relocation bolt and tie-rod mounting clamp
- Mounting hardware included for a direct bolt-on install
Choosing an adjustable stabilizer
An adjustable through-shaft stabilizer works as a single damper that controls steering movement from both sides. Compared with two separate opposing stabilizers, one unit reduces the number of mounting points and linkage parts that can wear. That makes it attractive for vehicles with lift kits or larger tires, where steering geometry tends to change.
Before installing, confirm the track bar and tie-rod are in good condition, since a stabilizer cannot fix worn joints. Check that the brackets and relocating hardware clear the axle and steering components at full turn and full compression. Use a proper torque wrench on every fastener and recheck them after the first few drives.
Adjustment is easiest to set on a test drive. Make small changes to the external clicks, then recheck the steering feel on straight highway runs and slow off-road turns. Keep a note of the setting you choose so you can return to it after service.
- Inspect track bar and tie-rod joints first
- Check clearance at full turn
- Torque all fasteners and recheck
- Note the click setting after tuning
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 983-02-088 |
| UPC | 700006894631 |
| Series | 2.0 Performance Series |
| Type | Complete kit |
| Stabilizer count | Single |
| Shaft diameter | 5/8 inch |
| Adjustment | External, 24 clicks |
| Body | Aluminum |
| Brackets | Included |
| Shock boot | Not included |
Vehicle fitment
Check your vehicle’s year, model and trim against this kit before buying.
The kit includes a tie-rod mounting clamp, so match it to your steering setup. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit uses a new track bar relocation bolt and a tie-rod mounting clamp, so both are part of the install. Steering loads are significant, so confirm every bolt and clamp is secure before driving.
What’s included
The kit includes the ATS stabilizer, mounting brackets, relocating hardware and mounting hardware. Not included: the shock boot.















