Overview
The Dana Spicer 25127-5X is a rear Dana 60 ring and pinion gear set with a 4.56 gear ratio. It is genuine Spicer gearing, made to the same standards as original equipment gears, and it is for rear axle use only.
It fits a broad range of vans and trucks from the 1970s through the 2000s, including Dodge, Ford, GMC and Chevrolet models. The gears have premium heat treatment, optimal tooth profiles and high-grade steel for durability.
Key features
- Rear Dana 60 ring and pinion set
- 4.56 gear ratio
- Premium heat treatment processes
- Optimal tooth profiles
- High-grade steel for durability
Ratio changes and speedometer
A rear gear ratio affects how the vehicle pulls from a stop and how fast the engine turns at a given speed. A numerically higher ratio gives stronger low-speed pull and crawling, while cruising engine speed rises. Tire size changes the same balance, so the two should be planned together.
Gears of this type need careful setup. Backlash and tooth contact are checked when the set goes in, and the pinion bearings and preload must be right for quiet, long-lived operation. After installation, the speedometer should be checked against a known reference, since a ratio change alters its reading.
- Recheck tooth contact after the first miles
- Verify speedometer accuracy after the change
- Watch for whine or hot oil during early use
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 25127-5X |
| Axle | Dana 60 |
| Position | Rear |
| Gear ratio | 4.56 |
| Heat treatment | Premium |
| Steel | High-grade |
Vehicle fitment
It fits 1974–1980 Dodge B- and D-series vans and trucks, 1981–1993 Dodge D- and W-series trucks, 1994–2003 Dodge Ram 2500 and 3500, 1980–2014 Ford E-series vans, 1975–2005 Ford E-350 Econoline vans, 1974–1986 Ford F-250 and 1975–1978 F-350 trucks, 1979–1991 GMC G3500 and K3500, 2003–2013 GMC Savana 2500, 2003–2009 Chevrolet Express 2500, and the 1975–1976 Jeep Wagoneer (SJ). Check your year, model and trim before ordering.
Jeep Wrangler and Cherokee models are not in this list, apart from the Wagoneer.
Installation notes
Set up the rear gears with backlash and tooth contact checked before the axle is used. A ratio change also alters the speedometer reading, so confirm the speedometer after installation.
What’s included
The ring and pinion gear set. Look over the package contents against your installation, bearings included, before starting.









