Select your vehicle

Dana Spicer Dana 44 AdvanTEK Rear Nodular Iron Differential Cover Kit (Blue) – 10053468

Dana Spicer

Shop Dana Spicer Differential Covers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear Dana 44 AdvanTEK axle cover
  • Blue powder coated nodular iron
  • Extra oil capacity
  • Engineered for off-road use

Description

Overview

The Dana Spicer Dana 44 AdvanTEK Rear Nodular Iron Differential Cover Kit (Blue), part D/S10053468, is a blue powder coated nodular iron cover for rear Dana 44 AdvanTEK axles.

The cover is engineered for off-road use and built from high-strength nodular iron to hold up across rough conditions. Its oil capacity is rated as extra.

Dana 44 is a heavy-duty axle family, and the AdvanTEK name marks this cover for that rear axle type. The cover is built for trail use, and its nodular iron body is meant to resist impacts that could dent or crack a stamped cover. The blue powder coat sits over that body. With extra oil capacity, it adds volume to the axle’s lubrication.

Key features

  • High-strength nodular iron
  • Engineered for off-road use
  • Blue powder coat finish
  • Extra oil capacity

Choosing a cover for trail use

A rear cover takes the brunt of rocks and branches on a trail rig, and the differential under it depends on that cover to keep debris out. Nodular iron holds its shape under impact, which matters more than a thin finish. The powder coat helps resist scrapes, but it does not stop a dented edge from leaking.

Oil capacity matters more on a Dana 44 that works hard. A cover with extra volume gives the lubricant more room to carry heat away, and it suits drivers who tow, climb long grades or run larger tires. Keep the fill level correct after installation, and check it again after the first few trail trips.

  • Inspect the cover edge for bends after rock contact
  • Replace the cover gasket whenever the cover comes off
  • Keep the drain plug and fill plug sealed

Specifications

Brand Dana Spicer
Part number D/S10053468
Material Nodular iron
Finish Blue powder coat
Axle location Rear
Axle type Dana 44 AdvanTEK
Oil capacity Extra

Vehicle fitment

It is a cover for rear Dana 44 AdvanTEK axles. Check that your rear axle is a Dana 44 AdvanTEK before ordering, since fit depends on axle type.

What’s included

A blue nodular iron cover kit.

Not included: Gear oil.

Questions & Answers

Does this fit a Dana 44 AdvanTEK rear?

Yes, it is made for rear Dana 44 AdvanTEK axles. Fit depends on the axle type, so check that your rear axle is a Dana 44 AdvanTEK before ordering.

Is it made from iron?

Yes. It is high-strength nodular iron with a blue powder coat, which Spicer says is engineered for off-road use and built to meet demanding conditions.

Does it hold extra oil?

Yes. The oil capacity is rated as extra, which gives the gear oil more volume to shed heat during hard use. Check the fill level once the cover is in place.

What is the part number?

D/S10053468 is the part number for this cover. The number 10053468 also appears in the name, so searching on either one finds the same cover.

Does a cover with extra oil capacity need a different fill procedure?

The fill procedure stays the same. Fill to the level mark on the housing with the vehicle level, then check after the first drives. Extra capacity means more oil overall, so drain and refill to the correct level rather than topping up blindly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dana Spicer Differential Covers on Amazon