Select your vehicle

Dana Spicer Rear Axle Shaft – Dana 44 – 75786-2X

Dana Spicer

Shop Jeep Wrangler TJ Axle Upgrade Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dana 44 rear left driver side axle shaft with 30 splines
  • O.E replacement design
  • Fits 2000–2001 Jeep Cherokee XJ and 1997–2002 Jeep Wrangler TJ

Description

Overview

The Dana Spicer 75786-2X is a rear left driver side Dana 44 axle shaft with 30 splines. It fits 2000–2001 Jeep Cherokee (XJ) in Classic, Limited, SE and Sport trim, and 1997–2002 Jeep Wrangler (TJ) in SE, Sahara, Sport and X trim.

Dana Spicer describes these as O.E replacement shafts for popular factory applications, so the design follows the shaft that came with the vehicle.

Key features

  • Rear left driver side position
  • Dana 44 axle type
  • 30 splines
  • O.E replacement design

Replacing a rear axle shaft

A rear axle shaft transfers drive torque from the differential to the wheel, and on many Dana 44 setups it also carries the wheel bearing load. Wear commonly shows up as clicking on turns, vibration under acceleration, or a wheel bearing that whines or gets warm. A shaft with worn splines can slip under load, so check the spline fit before driving.

When replacing a rear shaft, inspect the axle seal, bearing and retainer while the shaft is out. A seal that has started to leak can let contamination reach the bearing, so it is often replaced at the same time. Clean the splines and flange, and confirm the shaft seats fully before reassembly. Keep the rear differential fluid at the proper level after the work is finished.

  • Inspect the splines for twisting or wear
  • Check the bearing for heat or whine
  • Replace the seal while the shaft is out

Specifications

Brand Dana Spicer
Part number 75786-2X
Axle maker Dana
Axle location Rear
Axle shaft location Driver side
Position Rear left
Axle type Dana 44
Axle spline 30 splines

Vehicle fitment

It fits 2000–2001 Jeep Cherokee (XJ) in Classic, Limited, SE and Sport trim, and 1997–2002 Jeep Wrangler (TJ) in SE, Sahara, Sport and X trim. Compare the spline count and rear left position with the axle being replaced before fitting. Confirm fit for your vehicle’s year, model and trim before ordering.

Compare the spline count and rear left position with the axle being replaced before fitting.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One rear left driver side axle shaft.

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)2000–2001Classic, Limited, SE, Sport
Jeep Wrangler (TJ)1997–2002SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Dana Spicer 75786-2X fit a 2000 Jeep Cherokee XJ?

Yes. It fits the 2000–2001 Jeep Cherokee (XJ) in Classic, Limited, SE and Sport trim, which covers 2000. Confirm your trim before ordering.

Is this a driver side shaft?

Yes. It is the rear left driver side shaft for the Dana 44 axle, and the bullets list it as an O.E replacement design with 30 splines.

How many splines does it have?

It has 30 splines. Compare the spline count with the shaft being replaced before fitting, and confirm the Dana 44 axle type on your vehicle before installing.

Should the axle seal be replaced with the shaft?

Usually, yes. A seal that has started to leak can let contamination reach the bearing, so replacing it while the shaft is out is a common practice. Inspect the bearing retainer too and replace any part showing wear.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler TJ Axle Upgrade Kits on Amazon