Overview
The Dana Spicer 30636 is a rear Dana 60 spindle nut with a 1-13/16 – 16 thread, sold as a set of two. It has a 2.375 inch hex and a height of 0.344 inch, and it is made from heat-hardened steel. The OE casting numbers are 01922454 and 2358866.
The nut fits a long run of Chevrolet, Dodge, Ford and GMC vans and trucks from 1974 to 2013, along with the 1975–1976 Jeep Wagoneer (SJ). Match the thread and hex size to your axle before ordering, since a different thread will not fit the spindle.
Key features
- Rear Dana 60 spindle nut
- 1-13/16 – 16 thread
- Hex size 2.375 inch
- Height 0.344 inch
- Sold as a set of two, with OE numbers 01922454 and 2358866
- Made from heat-hardened steel
Spindle nut care and torque
A spindle nut holds the wheel bearing and hub in position on the spindle, so its job is to keep the bearing preload steady. Worn threads, a nut that turns loosely or a bearing that feels rough are signs the assembly needs attention. Inspect the spindle threads for damage before fitting a new nut, because a damaged thread can strip the new one.
When a nut is replaced, check the washer and lock arrangement, since a worn washer can let the nut back off. Tighten to the value in the axle service manual and recheck after the first few drives. Keep the set together so that both nuts are inspected at the same time, and replace them as a pair when the job calls for it.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 30636 |
| Axle | Dana 60 |
| Position | Rear |
| Thread size | 1.812 – 16 (1-13/16 – 16) |
| Hex size | 2.375 inch |
| Height | 0.344 inch |
| Quantity | 2 |
| OE part or casting numbers | 01922454, 2358866 |
| Material | Heat-hardened steel |
Vehicle fitment
It fits Chevrolet, Dodge, Ford and GMC vans and trucks from 1974 to 2013, including the 2003–2013 Chevrolet Express 2500 and the 2003–2013 GMC Savana 2500. For Jeep, it fits only the 1975–1976 Wagoneer (SJ). Check that the year, model and trim of your vehicle match before purchase.
Jeep Wrangler and Cherokee models are not in the list.
Installation notes
Confirm that the axle is a Dana 60 and that the nut is for the rear position before fitting. Match the thread and hex size to the spindle on your axle.
What’s included
Two spindle nuts, as the set is sold in a quantity of two.










