Overview
The Crown Automotive Brake Hose Inlet Banjo Bolt, part number 6035911AA, is a banjo bolt for brake hose inlets. The published details list it for front and front or rear positions, and specify applications without the SRT8 Package.
Crown Automotive sells this bolt as a replacement brake part. Match the position and package to your vehicle before selecting it.
Checking the banjo connection
A banjo bolt passes through the hollow banjo fitting at the end of a brake hose and clamps it to the caliper or master cylinder. The bolt carries brake fluid under pressure, so the seating surfaces must be clean and undamaged. Replacing a bolt is a good time to inspect the hose end, sealing washers and the port for corrosion or scoring.
Banjo bolts are often replaced together with their sealing washers, and new washers should be used every time a joint is opened. Brake work also affects stopping performance, so bleed the system after any line disconnection and test pedal feel at low speed before normal driving.
- Use new sealing washers
- Inspect the port for corrosion
- Bleed the brakes after disconnecting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 6035911AA |
| UPC | 848399047189 |
| Position | Front; front or rear |
| Package note | Without SRT8 Package |
| Fitment label | Direct Fit |
Vehicle fitment
Fitment is labeled Direct Fit, with the application limited to the front or rear position and to vehicles without the SRT8 Package. The published details give no vehicle years or models for this bolt.
Check whether your vehicle has the SRT8 Package before choosing this bolt, since it is for vehicles without that package. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Washers, seals and other hardware may be needed with the bolt, so check your installation before starting.
Not included: Brake hoses, calipers and brake lines are separate components, so obtain them separately if needed.









