Overview
The Rubicon Express RE9963 is a set of control arm mounts for the lower position. It is a direct fit mount.
Model and year coverage for these mounts should be confirmed before purchase.
Lower mount inspection
Lower control arm mounts carry the arm where it attaches to the frame or axle, so they see steady load from braking, acceleration and bumps. When a mount loosens or cracks, the arm can move and the wheel alignment can change. Drivers often notice a knock, a shimmy or tire wear that does not match the other corners.
Inspect the mount welds, the bracket and the bolts at each service and after rough off-road use. Look for cracks, rust, bent tabs and any play when the arm is pushed by hand. Tighten the fasteners to the value in your service manual and check them again after the first few drives.
If the arm is being changed at the same time, verify that the mount sits in the right position before final tightening, and confirm the arm has full travel without contact. Keep the old mounting hardware out of the new install unless it is clean and undamaged.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9963 |
| UPC | 614901219463 |
| Position | Lower |
Vehicle fitment
Verify the vehicle year, model and trim against the lower mount location before ordering.
Confirm your vehicle’s year, model and trim before ordering.



