Overview
The Rubicon Express RE9988 is a driver side front upper control arm bracket for mounting a custom axle in a Jeep Wrangler TJ. It is supplied as bare steel and must be welded in place. The manufacturer fitment list names the 1997-2006 Wrangler TJ and the 2004-2006 Wrangler LJ.
The bracket is cut from 3/16-inch cold rolled steel and formed on a CNC machine for accurate bends. It gives builders a clean, square attachment point for an aftermarket axle and accepts any tube diameter.
Key features
- Driver side front upper position for a custom axle build
- Laser cut 3/16-inch cold rolled steel with CNC formed bends
- Bare steel finish, ready for weld-on installation
- Control arm mount that accepts any tube diameter
- Sold as a single bracket
Weld-on installation tips
Weld-on brackets depend on clean, well-prepared metal. Remove paint, rust and mill scale from the mounting area on both the bracket and the frame or axle before fitting. Tack the bracket in place first, then check the arm angle and clearance through the full range of travel before running the final beads.
Welds on structural steel should be inspected for full penetration and cracks once the bracket is set. Plan the weld sequence to limit heat distortion, and let the part cool before checking alignment. A bracket that moves while welding can shift the arm geometry, so clamp it firmly throughout.
- Grind the mounting surfaces to bare metal
- Tack weld and check the arm angle before final welding
- Inspect welds for cracks after the first trail use
- Consider a professional weld inspection for heavy-use axles
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9988 |
| UPC | 614901442496 |
| Material | 3/16-inch cold rolled steel |
| Finish | Bare steel |
| Position | Driver side, front upper |
| Mount type | Control arm mount |
| Tube diameter | Any |
| Quantity | Single |
| Installation | Welding required |
Vehicle fitment
It fits the 1997-2006 Jeep Wrangler TJ and the 2004-2006 Wrangler LJ, including Unlimited models. Check the bracket position against your own frame and arm mounts before welding, since it is intended for a custom axle build.
The bracket is for TJ and LJ Wranglers. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Because the bracket ships bare, it has to be welded to the frame or axle structure. Fit it and check the arm angle before final welding so the arm sits where the axle geometry needs it.
What’s included
One driver side front upper control arm bracket in bare steel.
Not included: the control arm, the custom axle, and the hardware that connects the arm to the bracket.





