Overview
The TeraFlex Front Control Arm Sport Bracket Kit, part number TER1938125, is a bolt-on front bracket kit for Jeep Wrangler JL and JLU models with a 2.5 to 4.5 inch coil spring lift kit. The brackets correct caster angles and restore factory geometry. They fit 2018 to 2021 Jeep Wrangler JL models.
Caster is the forward tilt of the steering axis. Lifting a Wrangler changes it, and a bracket that corrects caster brings the front geometry back toward factory angles. That is the purpose TeraFlex gives for these brackets, along with a smoother ride.
The sport brackets install with the stock front upper and front lower control arms, so those arms stay in place. Check the fit against your lift height before ordering.
Key features
- Bolt-on front control arm sport brackets
- Designed for 2.5 to 4.5 inch coil spring lift kits
- Corrects caster angles and restores factory geometry.
- Works with the stock front upper and front lower arms
- Smoother ride.
- Part number TER1938125
Caster and steering feel
Caster is the forward tilt of the steering axis, and it shapes steering feel and straight-line stability. Lifting a Wrangler tends to reduce caster, so the steering can feel loose on the highway and the truck may pull to one side. Brackets that restore caster help bring the front end back toward its original feel.
Front alignment is part of any caster correction, since caster and camber are set together. After installation, have the front end aligned by a shop that checks caster, camber and toe. Uneven wear on a lifted Jeep often appears quickly when the front end is out of alignment, so inspect the tire edges after the first few drives.
- Inspect the front tires for uneven wear after alignment
- Check ball joints and bushings during routine service
- Recheck steering wheel centering on a test drive
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER1938125 |
| Type | Front control arm sport bracket kit |
| Lift range | 2.5 to 4.5 in. coil spring kits |
| Mounting | Bolt-on with stock front upper and lower arms |
| Fit | Direct fit |
Vehicle fitment
The kit fits 2018 to 2021 Jeep Wrangler (JL) models, including the Rubicon, Sport and Sport S two-door trims and the Unlimited Rubicon, Sahara, Sport and Sport S four-door trims.
Wrangler JK and Gladiator JT models are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bolt the brackets on with the stock front upper and front lower control arms, as TeraFlex describes. After installation, have the front alignment checked for caster.
What’s included
The front control arm sport brackets. Check the package contents against your installation before starting.





