Overview
The Pro Comp 91-11804B is a geometry correction bracket kit for lifted 2018–2026 Jeep Wrangler JL models in the 2-door and Unlimited 4-door trims. Pro Comp designed the brackets for owners who drive a lifted JL every day and want better ride quality.
The brackets move the front control arm mounting positions, which reduces control arm angles on a lifted JL. With smaller angles, the arm works less against the coil spring and shock during suspension travel. The reduced angle is designed to give a smoother ride over rough roads and small impacts from rocks and ledges.
The new mounting positions increase anti-dive, the front end’s resistance to compressing under hard braking. That helps the vehicle respond more predictably in hard braking and on uneven roads.
Key features
- Front control arm mounting correction for lifted JL models
- Reduced control arm angles
- Increased anti-dive
- Fits 2-door and Unlimited 4-door Wranglers
Front suspension after a JL lift
A lifted Wrangler JL changes the front control arm geometry because the axle moves farther from the frame. Control arm angle affects how the suspension loads the coil spring and shock, and it also influences how the front end reacts when braking. Front dive under braking is part of the same picture, so the response of the front end depends on the arm angles as well as the springs.
When choosing front geometry parts, consider the lift method first, then the steering components and track bar, since they all shift with the arms. Inspect the control arm bushings and ball joints for play after installation, and look for rub marks on the frame or sway bar links. A road test on uneven pavement is a practical way to confirm the new setup feels right.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 91-11804B |
| Position | Front |
| Vehicle type | Lifted Jeep Wrangler JL |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler JL in the 2-door and Unlimited 4-door trims, including the Freedom, Islander, Rubicon, Sahara, Sport, Willys and Moab trims, and the 392 and 4xe versions.
The Wrangler JK and earlier generations, and JL models from 2023 onward, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets are intended for a lifted JL, so check the lift height before installation. After installing the brackets, check the front alignment and confirm the control arms clear the frame and axle at full droop.
What’s included
The kit consists of front geometry correction brackets. Check the package contents against your installation before starting, including any hardware needed.






